User Manual

computer radio control system EN
4. 4.




Other parameters displayed in this menu ar e:
• EX P aramet er . Here you can select your sensor and its
parameter which will act as a source for the V ario system. T he Climb
R ate is predefined by default (if the MVARIO EX is detected) but y ou
are free to choose one of the other sensors and their parameters (for
example: an RP M probe to indicate high r ev olutions).
• Dead Zone (negative and positive). This field sets an ar ea
around the centre of the range with no acoustic sig nal . V alues ar e
relative to the c ent er .
• R ange (minimum, center and maximum). Here you can define
the full range of the sensor which will be indicated by the V ario
sy st em.


T he actual value of the sensor and its appropriate V ario output ar e
indicated at the bott om of the scr een.
9.4.4 Voice Output
This powerful function makes it easier for all modellers who need t o
know their actual telemetry values often but they don't want to (or
cannot) look at the display because it may be
inconvenient or
danger ous .


Voice output f or a timer
T he first menu row r epresents settings f or the voice output of a timer .
T he actual status of a single timer can be expressed by a synthesiz ed
v oic e . If you select the desired timer and a switch, every time the
switch is activat ed , the actual time is stated aloud .
If the timer type equals “Laps” t ype , another menu row equipped
with checkbox appears belo w . I n this r o w , “Report previous lap ”
allows you to determine whether you want to hear the time of a
current lap which is already running , or hear the time of the pr evious
lap which has ended r ec ently .

Negative dead zone

C entr e of r ange

Positive dead zone

Minimum Maxim um
Voice output f or telemetr y
T her e are two independent queues dedicated to output t elemetr y
values . T he first queue repeats its message every x seconds (number
of seconds elapsed is displayed over the F(1) button). Y ou can also
P ermanent sound Silence Beeping...
assign a switch to enable or disable the repeating of the c ountdo wn.
Every time this switch is activat ed , the appropriate variables ar e
reported by voice and then the c ountdo wn starts a new round until a
timeout is r eached .
T he second voice queue specifies which variables are reported only
onc e , after a single press of a switch. Y ou can select a T rigger swit ch
and a list of variables that are r epor t ed when the switch is activat ed .