Product Drawings

The accessory should be compatible with all Apple bands including the Milanese Loop and the Link

Bracelet.

To avoid interference with Apple Watch bands, accessories should:

●

Not exceed 20 mm in radius around the center of the C162 surface if the Apple Watch can be

attached in any orientation.

●

Not exceed a length of 40 mm across the surface of the C162 (for a width of 40 mm) along the

intended orientation of the Apple Watch if Apple Watch is intended to be attached in a specific

orientation. See Figure 72-2 (page 656).

Figure

72-2

C162 Charging Arm Clearance

40 mm max

40 mm min

The exposed surface of the C162 shall be 0.40 mm ±0.25 mm proud of the surface of the accessory.

The C162 shall be mounted such that any combination of Apple Watch and band shall not disengage

and fall off due to gravity.

The C162 surface may be mounted either horizontally (recommended) or vertically:

656

72. Apple Watch Charger Module

72.2 Mechanical