Product Drawings

72.4.1 Parameters
The following parameters shall be configured at the time of accessory manufacturing:
●
Set Vendor Name (page 661)
●
Set Product Name (page 661)
●
Set Model Number (page 662)
●
Set Serial Number (page 662 )
●
Set USB Vendor ID (page 662)
●
Set USB Product ID (page 662 )
●
Lock Configuration (page 663 )
Every C162:
●
Shall set the Vendor Name, Product Name, and Model Number to human-readable strings that
match names appearing on the accessory or its packaging.
●
Shall set the Vendor ID (VID) as assigned by the USB-IF and a unique Product ID (PID) assigned
by the accessory developer. The VID shall correspond to the brand name that appears on the
accessory or its packaging. See USB Host Mode (page 474).
●
Shall not be configured with empty strings or generic string values.
●
Shall be configured with a unique Serial Number (that is, serialized).
72.4.1.1 Set Vendor Name
Description : Sets the Vendor Name string.
Format : [SetVN-
vendorName
]
Parameters :
●
vendorName
: A string representation of the vendor name from the manufacturer (up to 64 UTF8
characters).
Example : [SetVN-Example Product Developer]
Response : <SetVN-Example Product Developer >
72.4.1.2 Set Product Name
Description : Sets the Product Name string.
Format : [SetPN-
productName
]
Parameters :
●
productName
: A string representation of the product name from the manufacturer (up to 64 UTF8
characters).
Example : [SetPN-Example Product]
2022-04-26 | Copyright © 2022 Apple Inc. All Rights Reserved.
661
72. Apple Watch Charger Module
72.4 Factory Configuration