User's Manual

14
To record video, please swipe from right to left or tap the arrow on the right side of
the screen or using the M button on the side of the device to change modes. Video
icon appears at the top left corner of the Live View OSD.
To start recording:
Press the REC (Shutter / Select) button. The red LED Lights will ash while recording.
To stop recording:
Press the REC (Shutter / Select) Button while recording. The red LED light will ash
three times and stops recording.
VIDEO
PHOTO
BURST PHOTO
To capture a Photo, select the photo mode on the touch screen, or press the M button
repeatedly until the Photo icon appears at the top left corner of the Live View OSD.
To take a photo:
Press and release the REC (Shutter / Select) Button. The red Camera Status Lights
ash when photos are taken.
In Burst Photo mode your camera takes multiple photos in short time intervals.
Please select the mode using the touch screen menu or press the M button repeat-
edly until the photo icon appears at the top left corner of the Live View OSD.
To take a burst photo:
Press the REC (Shutter / Select) Button. The red Camera Status Lights ash and the
camera captures photos multiple times.
Available interval options:
3 photos / 1 second, 5 photos / 1 second, 10 photos / 2seconds, 30 photos / 1 sec-
ond, 30 photos / 2 seconds or 30 photos / 3 seconds.
Tips: The Live View may not work some resolution settings. When you
start recording in resolutions that are not supported, the message
“PREVIEW NOT SUPPORTED” will appear on the screen. When you stop
recording, the live view will be displayed again.
Tips: Sometimes 30 photos / 1 second can be too fast. Try a slower BURST
PHOTO setting to get better results.