User's Manual

1. If “No rmware to update” message appears after rmware update,

Solution: Connect your device to a PC and delete all les stored in the storage.

Then copy the .bin rmware le to the memory and reboot.

2. If “Low rmware versions” message appears after rmware update,

Solution: Connect your device to a PC and delete all les in the storage. Reboot to

check the version of the rmware.

3. If you can’t see your on the camera network list,

Solution: In order to establish Wi-Fi connection between P1 and GoPro, the GoPro

needs to have its SSID. The SSID can be generated through the GoPro App. Before

using with P1, please establish connection between GoPro HERO4 and GoPro App

to generate the SSID.

4. If the diplay gets darker or backlight goes off,

Solution: It means that the battery is running low, so please recharge the device.

5. If your device freezes while using,

Solution: Press the reset button located next to the charging port. If the problem

persists, please constact customer support.

6. If the device does not boot, or shuts down automatically while booting,

Solution: Please connect your device to your PC, and have all les deleted in the

storage. If there aren’t any les, please contact customer support.

7. Trouble Shooting Guide