User's Manual

Wi-Fi Connection: Connection Failure / Reconnect

1. Flashing red LED and Wi-Fi Network Not Connected message will appear if Wi-Fi

fails to connect or lose its signal.

2. Type in your password again and try reconnecting the device.

3. If the connection is restored, blue LED will ash and the Live View will appear.

4. When reusing the device, P1 will try to connect to last device it was connected to

using the information saved from previous use.

5. Switching between different cameras can be done in the Settings mode ► Cam-

era Network menu. Please choose the camera you wish to switch to.

Tips: When the Wi-Fi signal gets weaker, it may cause lags or the screen

may not display the screen.