User's Manual

Page 18 of 30
9. For a quick test while magnet is fully installed:
 Close the door / window – a Green light will glow, indicating correct
installation.
 Open the door/ window – a red light will glow, indicating correct installation.
10. For detaching the Magnetic Detector from the surface of the door or window (in
case of battery replacement or any other maintenance activity) insert a coin or a
screw driver to hole, at the side of the device, and lift the Magnet cover up.
6.4 Mounting Indoor Siren
1. Remove the battery cover from the Indoor Siren and insert 4 AA batteries. (The
siren will give an audio indication that it is operational).
2. Replace the battery cover on the Indoor Siren.
3. Use double-sided tape to mount the Indoor Siren on a wall in a suitable location
that will allow the alarm to be heard and act as a deterrent to potential intruders.
4. For detaching the device from the wall (in case of battery replacement or any
other maintenance activity) push the white lock at the bottom of the device and
slide the device up.
6.5 Activating the Key Fob