User's Manual

Page 19 of 30

 To insert the batteries:

1. Using a small coin, rotate the battery cover ¼ turn counter-clockwise,

until the two dots on the battery cover and the back of the device are

adjacent to one another, and remove the cover.

2. On the battery, note the surface marked +, indicating positive polarity.

3. With the surface marked + facing up, insert the battery into the battery

holder.

4. Replace the battery cover, and using a small coin, rotate the battery

cover clockwise until the two dots on the battery cover are in their

original positions.

All LEDs flash twice to indicate that the battery is connected.

6.6 Buttons and Indications