User's Manual

Page 6 of 30
1 System Activation
1. Open back of control unit and write the 8-digit alpha-numeric serial number here
for future reference :
2. Insert SIM card.
3. Plug the power cable into the control unit and into an electrical socket. (The light
on the front of the control unit will glow orange.)
4. Insert the square battery, replace the cover on the back of the control unit and
place the control unit on a flat surface.
5. Replace back cover, place on flat surface and wait for glowing light to turn from
orange to green before moving to next step. (The green light indicates that the
control unit is now activated. This can take approximately 5 minutes or less)