User Manual

Operation
36
EverGuard Control Panel
5. Select the desired provider and click. The selected provider is listed on the
screen and a predefined dialing sequence is added.
6. A selection of at least one communication channel is mandatory. A pop up
message will appear in case of no communication channel is chosen.
7. Roll to Delay and choose yes or no.
8. To add a required dialing prefix, roll to Prefix and click. Select the prefix
from the dropdown.
9. Enter the required prefix digits and click. The prefix digits appear on the
screen.
10. Click Update. You are prompted to save the changes
 To Edit the Dialer Settings:
1. On the Installation screen, roll the trackball to the Dialer Settings
icon.
2. Click the icon. The Editing Dialer Settings screen appears.
3. Modify the settings as in the procedure for configuring Dialing Settings.
 To enter the Operation Code:
Configuring the Operation Code is only available to control panels that have not
yet been set to operating mode (CCS).
The following Operation Codes are used in the system: