User Manual

Operation
44
EverGuard Control Panel
 To download the new configurations to the ES7000EG Control
Panel:
 From the Remote Panel menu, select Download or
Click from the toolbar. The changed configurations are downloaded to
the control panels.
 To disconnect from an ES7000EG control panel:
1. From the Link menu select Disconnect or
Click on the toolbar.
2. To confirm the disconnection, click OK. You are notified that the End of
Communication is approved by the Control Panel. The connection to the
ES7000EG control panel is closed.
 To access the panel information:
The Panel Info dialog box displays the current settings of the ES7000EG control
panel to which the ESI-CMS is currently connected. Most of the information is
read-only. Using this screen, you can set the Communication mode, Arm/Disarm
the ES7000EG control panel, refresh the data, and upload the configuration from
the ESI-CMS to the panel.
1. From the Options menu, select Panel Info. The Panel Info dialog box
appears. The following information is displayed:
Figure 17: Panel Info Dialog Box
Security
 System status
 Arm – the system is fully armed
 Part Arm – the designated partition is armed
 Disarmed – the system is disarmed