User Manual
Operation
EverGuard Control Panel
57
Figure 23: Video Configuration Suspect Tab
2. To access a specific tab page, click on the appropriate tab.
3. For all tabs (except for the Configuration tab), set the following parameters:
To enable, check the checkbox to activate all parameters underneath.
For Transmit video automatically, check the checkbox to transmit the
video automatically to the monitoring station.
From the Length of video in seconds dropdown list, select parameters
between 5 to 30 seconds.
From the Format dropdown list, select one of the following video formats:
H 264 VES or H 264 MP4
From the Frame Rate dropdown list, select a parameter of between 5 and
30 frame rates.
From the Resolution dropdown list, select one of the following sizes:
640x480, 320x240, 160x120, or 80x60.
From the Bit Rate dropdown list, select a parameter of between 20 and
255 bit rates.
From the I-Frame interval dropdown list, select one of the following
intervals: 5, 10, 15, 20, 30, 45, 60, or 255 I-frame intervals.
4. For the Tamper Alarm, SOS, and OPEN/CLOSE tabs, set the following
additional parameters: