User Manual

Operation

EverGuard Control Panel

 128k

 256k

 OTA Enable – check to enable object tracking

 OTA Crop Enable – check to enable zoom in upon movement detection

Note: OTA Enable and OTA Crop Enable can only be enabled with a

resolution set to 320x240.

6. Click . You are returned to the Control Panel screen.

Caution: If you have not chosen a valid IVD or OVDS, the parameters in

the Video Scenario Configuration tabs cannot be saved.

 To configure the Automation Configuration:

Using the Automation Configuration dialog box, configure the device and ID of the

automated actions.

Note: When the Automation Configuration dialog box is initially opened, all

checkboxes are unmarked, and all of the parameters are dimmed and not

configurable. Click a checkbox to enable.

1. On the Control Panel screen, click Automation Configuration button. The

Automation Configuration dialog box appears.

Figure 26: Automation Configuration Dialog Box

2. To edit a specific parameter, mark the relevant checkbox. The parameter is

enabled. You can then modify it.

3. For each automatic re-action parameter, define the following: