User Manual

Operation
EverGuard Control Panel
63
Figure 30: User Settings Screen
2. Under Users, select a line item or from the User ID dropdown list, select the
user ID (the range is between 1 and 32).
3. For Name, enter a user name (up to 12 characters) (optional).
4. For Password, enter a password (up to 8 characters). This is for the end
user to use when accessing different settings (e.g., comfort message, etc.).
Note: The password must have 8 characters, which can be
numbers, letters and symbols. The password is used for
verification data.
5. For Pin Code, enter a 4 digit code to be used when entering and exiting.
6. From the Privilege dropdown list, select the following for access privileges:
 Master – for Owners or Managers
 Standard – for permanent residents or staff
 Access Only – usually assigned to minor or temporary staff or visitors
7. For Configuration Bits, the following checkboxes/dropdown lists are
available: Attendance, Temporary, and No. of Accesses.
 If Master is selected, Attendance is active (and is optional) and
Temporary is disabled
 If Standard is selected, both Attendance and Temporary are active and
are optional
 If Access Only is selected, both Attendance and Temporary are active and
mandatory