User Guide Part 3

Installation of the We.R™ System
We.R
™
System User Guide
97
Note: In case the installation of the batteries could not be accomplished
within the three (3) minutes period, it is possible to restart the process by
applying step 3 (on page 95) and onwards again.
10. Batteries insertion triggers a handshake process in which the Camera communicates with
the CCU to inform it of its presence and the CCU add it to its peripherals’ inventory.
11. If the CCU did not detect the new Camera within this time-frame, the following error ( )
message will appear within the Add New Device window:
Figure 66: Add New Camera Timeout Error Message
Click over the button to re-initiate the Add New Device process by.
Clicking over the button will terminate the Add New Device process.
12. If the new Camera was properly detected by the CCU within this time-frame, the counter
will freeze and a Device Properties sub-window will appear within the Add New Device
window, where the Camera’s system name/location needs to be typed-in.