User Guide Part 3

Installation of the We.R™ System
100
We.R
™
System User Guide
3.6.4.1. Walk Test Mode
The Walk Test Mode is a test mode used following a device power-up (replacement of a
battery or once a new Camera was added) for initial testing of the system functionality.
This test runs for about 10-minutes and during this period the device sends an event to the
Central Control Unit following detecting an actual event.
3.6.4.2. Normal Operation Mode
Following the termination of the Walk Test Mode (i.e. after 10 minutes), the system switches
the Camera into Normal Operation Mode. This mode saves Camera battery power.
In this mode, the Camera switches into 2½ minutes hibernation period following a detection
event. This means that the Camera will not transmit events to the Central Control Unit during
this period.
If a detection event occurs during this hibernation, the timer counting the 2½ minutes will
restart and count the 2½ minutes period again.
This process will repeat itself until there is no detection for the entire 2½ minutes.
Following the 2½ minutes hibernation period, the Camera will be switched back to normal
triggering mode of operation.
Note: Advanced Configuration of the Camera can be found in
paragraph 4.5.4 below.
3.7. The Motion Detector (PIR) – ES800PIR
The Motion Detector is a battery operated bi-directional wireless Passive Infrared Detector
(PIR). It utilizes Essence’s unique white 4
th
generation DragonflyEye
™
Multi-Zone spherical lens
with a optional pet immune feature and advanced detection algorithms for false alarm
suppression and excellent detection. The Motion Detector's ease of installation and long
battery life result in reduced operational costs.