User Guide Part 3
Installation of the We.Râ„¢ System
We.R
â„¢
System User Guide
119
4. A roll-down selection menu will open.
5. Click over the _Add Window/Door Sensor_ option of the menu as illustrated inn Figure 85
above:
6. An Add New Device (Window/Door Sensor) window will pop-up and its timer will start
running.
Figure 86: Add Magnetic Sensor Window
7. Verify that the Device Type is Window/Door Sensor.
8. The down-counter provides a time-frame of three (3) minutes within which the battery
should be installed, as demonstrated in Figure 87 below (the  pole as marked within the
device body), to power-up the Magnetic Sensor.
Verify battery polarity match to marking within the unit body.
Note: In case the installation of the batteries could not be accomplished
within the three (3) minutes period, it is possible to restart the process by
applying step 2 (on page 118) and onwards again.