User Guide Part 3

Installation of the We.R™ System
We.R
™
System User Guide
129
Note: You may also want to refer to paragraph 5.1 below to get acquainted
with the process of installing/replacing a battery in the Indoor Siren.
1. Prepare four (4) AA-size Alkaline batteries required to power the Siren.
2. Activate the We.R
™
Web Application.
3. Select the Devices page (tab) and click over the button.
4. A roll-down selection menu will open.
Figure 95: Add Siren Device Utilizing Web Application
5. Click over the _Add Siren_ option of the menu as illustrated in Figure 95 above:
6. An Add New Device (Siren) window will pop-up and its timer will start running.