User Guide Part 3

Installation of the We.R™ System
We.R
™
System User Guide
89
 Both security and comfort look-in motion detected image sequences via a smartphone
and the Web Applications.
 On-demand or PIR-triggered photo verification capabilities – captures high resolution,
full-color JPEG images at rate of up to 5 frames per second, with automatic selection
of quality/resolution – from 80x60 to 640x480.
 Compresses the photos data streams sent in real-time via ECOP RF to the CCU.
These streams are relayed to a designated device (smartphone, computer, etc.).
 On-board Flash Memory for Video clip re-transmissions.
 Data security is ensured with 128-bit AES encryption.
 Up to 500m (1640 feet) RF range (open air) communication.
 Employs sealed optics and temperature compensation for the PIR to become immune
to direct light, insects, and pets (optional) for reduction of false alarms.
 Utilizes multi-zone spherical lens for exceptional detection coverage (120
o
horizontal,
105
o
vertical) and detection range of about 12m (40ft).
 Supports automatic over-the-air software upgrade programming and configuration.
 Tamper Alarm – when the unit is tilted.
 Provides long operation period (pending video look-in usage) while powered by three
(3) standard AA-size Alkaline batteries.
 Super bright white LED (flash) for intruder pre-emption in total darkness.
 Shooting Angle: 67°.
 Shooting Range: Up to 10m (33ft).
3.6.1.1. The Camera Modes of Operation
The Camera can be used in two different modes of operation:
 Security Mode – Captures images of intruders caught "red-handed".
 Comfort Mode – Remotely activated allowing users to see (via Web Application or the
mobile devices) what happens within the premises, whenever desired.