Tip Kit Instructions

BRACKET 4

NYLON STRAP

THE WALL

BACK SIDE

PLASIC ANCHOR

Young children may be injured by tipping furniture and the

use of a tipping restraint is highly recommended.

When properly installed, this restraint could provide protection

against the unexpected tipping of furniture due to small

tremors, bumps or climbing. We recommend mounting this

restraint to a wall stud.

FURNITURE TIPPING RESTRAINT FOR CANE MEDIA CHEST

Installation Instruction:

WARNING: This product is only a deterrent. It is not a

substitute for proper adult supervision.

Attach one of the mounting brackets (01) securely near the top back edge of the furniure

piece by inserting the screw (04). Refer to picture A.

Determine the final position of the furniture piece. Mark location on the wall

approximately 1" below the bracket mounted to the back of the furniture.

Drill a starter hole into the wall stud. If wall stud is not available, drill a hole into the wall and

insert plastic anchor. Gently tap anchor until the flange of the anchor (05) is flush with the wall.

Attach the second bracket (01) by inserting and securing the screw (03) to the wall.

Refer to picture B.

Align the two brackets.

Thread the strap (02) through both brackets and tighten until snug.

Check to make sure that the brackets are flrmly installed and the strap is secured.

CODE COMPONENT QTY

TIPPING KIT CHECK LIST

SHORT FURNITURE-SIDE

MOUNTING SCREWS

LONG STUD

MOUNTING SCREWS

Collection's Name: Bella Antique