Table gaz ETG44i
TABLE DES MATIÈRES Informations de sécurité Consignes de sécurité Description de l'appareil Utilisation quotidienne Conseils 2 4 7 7 9 Entretien et nettoyage En cas d'anomalie de fonctionnement Installation Caractéristiques techniques Rendement énergétique 9 11 12 16 18 Sous réserve de modifications. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies.
Sécurité générale • • • • • • • • • • • AVERTISSEMENT : L'appareil et ses parties accessibles deviennent chauds pendant son fonctionnement. Veillez à ne pas toucher les éléments chauffants. Les enfants de moins de 8 ans doivent être tenus à l'écart, à moins d'être surveillés en permanence. Ne faites pas fonctionner l'appareil avec un minuteur externe ou un système de commande à distance.
• AVERTISSEMENT : Utilisez uniquement les dispositifs de protection pour table de cuisson conçus ou indiqués comme adaptés par le fabricant de l'appareil de cuisson dans les instructions d'utilisation, ou les dispositifs de protection pour table de cuisson intégrés à l'appareil. L'utilisation de dispositifs de protection non adaptés peut entraîner des accidents. CONSIGNES DE SÉCURITÉ suffisamment d'espace entre le fond de l'appareil et le tiroir supérieur pour que l'air puisse circuler.
• • • • • • • • • surfaces brûlantes de l'appareil ou les récipients brûlants lorsque vous branchez l'appareil à des prises électriques situées à proximité. N'utilisez pas d'adaptateurs multiprises ni de rallonges. Veillez à ne pas endommager la fiche secteur (si présente) ni le câble d'alimentation. Contactez notre service après-vente agréé ou un électricien pour remplacer le câble d'alimentation s'il est endommagé.
• Les graisses et l'huile chaudes peuvent dégager des vapeurs inflammables. Tenez les flammes ou les objets chauds éloignés des graisses et de l'huile lorsque vous vous en servez pour cuisiner. • Les vapeurs dégagées par l'huile très chaude peuvent provoquer une combustion spontanée. • L'huile qui a servi contient des restes d'aliments pouvant provoquer un incendie à température plus faible que l'huile n'ayant jamais servi.
Mise au rebut • Coupez le câble d'alimentation au ras de l'appareil et mettez-le au rebut. • Aplatissez les tuyaux de gaz externes. AVERTISSEMENT! Risque de blessure ou d'asphyxie. Maintenance • Contactez votre service municipal pour obtenir des informations sur la marche à suivre pour mettre l'appareil au rebut. • Débranchez l'appareil de l'alimentation électrique. • Pour réparer l'appareil, contactez un service après-vente agréé. • Utilisez exclusivement des pièces d'origine.
Vue d'ensemble des brûleurs Si, après plusieurs tentatives, le brûleur ne s'allume pas, vérifiez que la couronne et son chapeau sont correctement placés. AVERTISSEMENT! Ne maintenez pas la manette de commande enfoncée plus de 15 secondes. Si le brûleur ne s'allume pas au bout de 15 secondes, relâchez la manette de commande, tournez-la sur la position d'arrêt et attendez au moins 1 minute avant de réessayer d'allumer le brûleur. A B C D A. B. C. D.
La table de cuisson est fournie avec les valves de distribution progressive. Elles rendent le réglage de la flamme plus précis. AVERTISSEMENT! Abaissez ou coupez toujours la flamme avant de retirer les récipients du brûleur. Arrêt du brûleur Pour éteindre la flamme, tournez la manette sur la position Arrêt . CONSEILS AVERTISSEMENT! Reportezvous aux chapitres concernant la sécurité. ATTENTION! Assurez-vous que les poignées des récipients ne dépassent pas du devant de la table de cuisson.
Acier inoxydable • Lavez les éléments en acier inoxydable à l'eau, puis séchez-les à l'aide d'un chiffon doux. • Pour retirer les résidus d'aliments et de graisses brûlés ou les taches tenaces, déposez une petite quantité de détergent doux dessus et laissez-le agir pendant quelques minutes avant de nettoyer. • Pour protéger les surfaces en acier, utilisez des produits nettoyants spécifiquement conçus pour le nettoyage de l'acier inoxydable.
Entretien périodique dotée d'une électrode en métal. Veillez à maintenir ces composants propres afin de faciliter l'allumage. Assurez-vous également que les orifices des couronnes des brûleurs ne sont pas obstrués. Contactez périodiquement votre service après-vente pour contrôler l'état du tuyau d'arrivée de gaz et du régulateur de pression si votre installation en est équipée. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportezvous aux chapitres concernant la sécurité.
Étiquettes fournies dans le sachet des accessoires Collez les étiquettes adhésives comme indiqué ci-dessous : A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C 0049 MOD. PROD.NO. SER.NO. TYPE IP20 03 IT MADE IN ITALY A. Collez-la sur la carte de garantie et envoyez cette partie (le cas échéant). B. Collez-la sur la carte de garantie et conservez cette partie (le cas échéant). C. Collez-la sur la notice d'utilisation.
comprimés. Soyez également vigilant lorsque la table est installée avec un four. utiliser un tuyau flexible. Fixez fermement le tuyau flexible à l'aide de colliers. Gaz liquéfié Utilisez un support de tuyau en caoutchouc pour le gaz liquéfié. Intercalez toujours le joint. Continuez alors le raccordement au gaz. Assurez-vous que la pression de l'alimentation en gaz de l'appareil correspond aux valeurs recommandées. Le raccordement réglable est relié à la rampe complète par un écrou fileté G 1/2 po.
Branchement électrique gaz que vous utilisez (voir le tableau dans le chapitre « Caractéristiques techniques »). 4. Assemblez les pièces et suivez la même procédure dans l'ordre inverse. 5. Remplacez la plaque signalétique (qui se trouve près du tuyau d'arrivée de gaz) par celle correspondant au nouveau type d'alimentation en gaz. Vous trouverez cette plaque dans le sachet fourni avec l'appareil.
Montage 1. 5. 2. 6. 3. 7. min. 100 mm min. 650 mm min. 55 mm 30 mm 480 mm 560 mm 4. 8. 400 mm 50 mm 9. 15 Si un meuble est installé à 400 mm au-dessus de la table de cuisson, vous devez laisser une distance de sécurité minimale de 50 mm à gauche ou à droite du bord de la table de cuisson.
facilement accessible au cas où une intervention technique serait nécessaire. A Élément de cuisine avec une porte B 10. A) joint fourni B) équerres fournies min 6 mm A 11. B min 30 mm min 5 mm (max 150 mm) 60 mm A. Panneau amovible B. Espace pour les branchements Élément de cuisine avec four Les branchements électriques de la table de cuisson et du four doivent être installés séparément pour des raisons de sécurité et pour permettre un retrait facile du four de l'ensemble.
Diamètres des vis de réglage BRÛLEUR Ø VIS DE RÉGLAGE 1/100 mm Rapide 42 Semi-rapide 32 Auxiliaire 28 Autres caractéristiques techniques PUISSANCE TOTA‐ LE : Gaz d'origine : G20/G25 (2E+) 20/25 mbar = 8 kW Gaz de remplace‐ ment : G30 (3+) 28-30 mbar = 567 g/h G31 (3+) 37 mbar = 557 g/h Alimentation électri‐ que : 220-240 V ~ 50/60 Hz Catégorie de l'appa‐ reil : II2E+3+ Raccordement au gaz : G 1/2" Classe de l'appareil : 3 Brûleurs à gaz pour GAZ NATUREL G20/G25 20/25 mbar BRÛLEUR PUISS
RENDEMENT ÉNERGÉTIQUE Informations de produit selon la norme EU 66/2014 Identification du modèle ETG44i Type de table de cuisson Table de cuisson intégrée Nombre de brûleurs à gaz 4 Efficacité énergétique selon le brû‐ leur à gaz (EE gas burner) Arrière gauche - Semi-rapide 54.4% Arrière droit - Semi-rapide 55.5% Avant gauche - Rapide 55.3% Avant droit - Auxiliaire non applicable Efficacité énergétique de la table de cuisson (EE gas hob) 55.
867334761-A-282017 ETG44i Art. 8003460; CE0476 Réf.