Owner`s manual

ASSEMBLY
1. Unpack humidifier from carton. Remove manual.
2. Remove all packaging materials. Remove casters, water bottle, housing
assembly, and filter from the box
CASTERS
3. Turn the emptied cabinet upside down. Insert each caster stem into one of
the four caster holes manually Do not use tools. The casters should fit
snugly and be inserted until the stem shoulder reaches the cabinet surface.
4. Turn the cabinet right side up.
NOTES ON LOCATION:
In order to get the most effective use from your humidifier, it is important to
position the unit where the most humidity is needed or where the moist air will
be circulated throughout the house such as near a cold air return. If the unit is
positioned close to a window, condensation may form on the window pane. If
this occurs the unit should be repositioned in another location.
Place humidifier on a flat level
surface. Do NOT position the unit
directly in front of a hot air duct or
radiator. Do NOT place on soft
carpet. Due to release of cool, moist
air from the humidifier, it is best to
direct air away from thermostat and
hot air registers. Position humidifier
next to an inside wall on a level place
at least 2 inches away from the wall
or curtains.
Be sure that the humidistat, which is
located on the power cord, is free
from obstruction and away from any
hot air source.
Locate nearest 120V A.C. wall socket in the location desired, preferably on
inside wall. With the humidifier in the desired location, route the electrical cord
safely so no one will trip or upset the humidifier. Plug unit in.
After the humidifier is positioned where it will be operating you are ready to fill
the humidifier.
4