ELECTRIC STOVE HEATER Model Nos.: EFS-XB15A; BESKE1500XI OWNER’S MANUAL WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual for future reference. If you sell or give this product away, make sure this manual accompanies this product.
IMPORTANT SAFETY INSTRUCTIONS! WARNING Read all instructions before using this heater! This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear.
WARNING For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties, and could cause injury. This product is not intended to be a primary heat source. It is for supplemental heat only. INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! NEVER modify this heater. Doing so could result in personal injury or property damage.
PREPARATION This product has a GLASS panel! ALWAYS use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. Remove all parts and hardware from the carton and place them on a clean, soft, and dry surface. Make sure all parts are dry, and the power cord and plug are not damaged. See IMPORTANT SAFETY INFORMATION on pages 2 and 3. Compare the contents with the parts list to make sure nothing is missing. Dispose of all packaging materials properly.
ASSEMBLY ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater, or change the bulb(s), while it is plugged in. 1) Carefully turn the STOVE (A) upside down and lay it on a clean soft surface. 2) Align the holes in the leg (B) with the holes in the corner of the stove frame as shown. 3) Thread three SCREWS (C) through the holes in the leg and into the stove frame. Partially tighten the screws with a Phillips screwdriver.
OPERATION NOTICE BUTTON When the heat function is used for the first time, a slight odor may be present. This is normal and should not occur again unless the heater is not used for an extended period of time. ACTION / FUNCTION 1. Press to turn on flame effect and enable heater. Heater switches will not work unless this switch is turned on. ON/OFF 2. Press again to shut off the power to all functions. INDICATION / RESULT 1. Flame effect turns on. Power light on switch illuminates.
NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. MAINTENANCE Risk of electric shock! DO NOT OPEN the main panels! No user-serviceable parts inside! Storage: Store heater in a clean dry place when not in use. Electrical and Moving Parts: The fan and motors are lubricated at the factory and will not require lubrication for the life of the stove.
LIMITED WARRANTY This warrants to the original purchaser that this product is free from defects in material and workmanship as of the date of purchase and that it will, under normal use and proper care, remain so for one year from the date of purchase. Missing or initially defective parts will be replaced free of charge during the period of this limited warranty. If parts are unavailable, comparable replacement or refund will be given. The original dated sales receipt is required for all warranty claims.
