ELECTRIC FIREPLACE INSERT Models: EFW-XB24B For use with Mantel Model Nos. OWNER’S MANUAL WARNING! Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, serious personal injury, or death. Only use this heater as described in this manual. Any other use is not recommended by the manufacturer, and may cause fire, electric shock, or other personal injury.
IMPORTANT SAFETY INFORMATION! WARNING Read all instructions before using the heater! DO NOT USE OUTDOORS! DO NOT run power cord under carpeting. DO NOT cover power cord with throw rugs, runners, or similar coverings. DO NOT route power cord under furniture or appliances. Arrange power cord away from traffic area, and where it will not be tripped over. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause electric shock or fire, or damage the heater.
WARNING Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet. ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace. ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet.
Preparation This product includes a GLASS! Always use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. Remove all contents from the carton and place them on a clean, soft, dry surface. Check to make sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
NOTICE The wall mount fasteners included with this fireplace are for use ONLY with a wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder blocks, or other wall types, consult a professional for the best attachment methods. ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating. Failure to do so could result in electric shock, fire, or personal injury. Drywall Studs STEP 2. A. Locate the wall studs using an electronic stud-finder. B.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating. Failure to do so could result in electric shock, fire, or personal injury. D E A A NOTE: We recommend that two capable adult perform this procedure. STEP 5. With the help of a capable adult, lift the fireplace and align the two hooks on the back of the fireplace with the slots on the wall bracket. Carefully set the hooks into the slots. STEP 6.
This next step involves GLASS! ALWAYS use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. ALWAYS keep the decorative glass OUT OF REACH OF CHILDREN! Leave no glass pieces where children can find them. Failure to do so could cause a choking hazard. F NOTE: We recommend that two capable adult perform this procedure. STEP 9A.
BUTTON ON ACTION and INDICATION CONTROL PANEL 1. Press ON (l). Power turns on. All functions are enabled. 2. Press OFF (O). Power, flame effect, and all functions turn off. OFF POWER 1. Press once. Flame effect and indicator turn on. 2. Press again. Power and all functions turn off. 1. Press +. ½ h light turns on. Timer is set to ½ hour. 2. Press again. 1h light turns on. Timer is set to 1 hour. + TIMER - 3. Press until desired setting is reached. Timer setting increases by ½ hour up to 7½ h.
Remote Control (Control panel POWER switch must be ON to use remote control.) BUTTON ACTION and INDICATION REMOTE CONTROL 1. Press once. Flame effect turns on High and indicator light turns on. 2. Press again. Power and all functions turn off. POWER 1. Press once. Small indicator lights up. Fan blows cool air. 750W heater turns on and blows warm air. 2. Press again. Large indicator lights up. 1500W heater turns on and blows hot air. 3. Press again. Heaters turn off.
Temperature Limiting Control This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature, the heater will automatically turn OFF. To reset: 1. Unplug the power cord from the outlet. 2. Turn the ON/OFF switch on the CONTROL PANEL to OFF. 3. Wait 5 minutes. 4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are, use a vacuum to clean the vent areas. 5.
Cleaning ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. Metal: Buff using a soft cloth, slightly dampened with a citrus oil-based product. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Limited Warranty Manufacturer warrants this product for replacement or repair of parts to the original purchaser for a period of 1 (one) year from the original date of purchase. The original dated sales receipt is required for all warranty claims. This limited warranty does not cover replacement of glass or light bulbs, shipping costs, and normal wear and tear.
