Installation guide

Removetowelfromdishwasher.Reinstallthelower
dishrack.
If needed, see website for animated representation
of this step. Visit www.whirlpool.eom/anchoring under
FAQ tab.
Check that grounding clip is attached to the lower panel.
Position the lower panel behind the access panel. On some
models there is insulation on the access panel which must
fall behind the insulation on the lower panel.
Hold the two panels together and place them against
dishwasher leg. Using a philips or 1/4" screwdriver, reinstall
the screws through the holes in the access panel and the
slots in the lower panel.
Check that the lower edge of the lower panel contacts
the floor. Adjust if necessary.
Tighten access panel screws.
TEFLON is a registered trademark of E.I. Du Pont
De Nemours and Company.
19