Users Manual

9
command. Otherwise it will be time out and not accept any voice command. You must wake up the voice module again.
4. System Information 4.1 IO ports
Figure 7
Figure 8
The IO in Figure 7 connects to IRV relay box by any standard RJ-45 cable. It is CAN and 12V DC input combo port. Note: do not connect to any network port. It will not work and may damage the unit. The IO is Figure 8 is firmware upgrade port for certified technicians. Please do not upgrade the firmware yourself.
4.2 Specifications:
Maximum Operating Voltage
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
14.4V
Minimum Operating Voltage ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯11.3V Operating Temperature ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯-20~60℃ Chassis Outline Dimension⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯7.62(W)*4.97(H)*1.03(D) Maximumdistance between panel and phone ⋯⋯⋯ 50ft