User Manual
Table Of Contents
- 1. Operation Guide
- Slides Control
- Awnings Control
- Utilities Control
- HVAC (Option) Control
- Monitor Water Level
- Generator (Option)
- 2. Smartphone Control
- 2.1 Phone App
- 2.2 Pairing Phones
- 2.3 User interface of different functions
- 3. Voice Control Operation
- 3.1 One voice command a time
- 3.2 Time out of voice control
- 4. IO Ports
- 5. Specifications
- 6. Packing List
- 7. Installation
- 7.1 Installation tool and supplies
- 7.2 Mounting the controller
11
7.2 Mounting the controller
Use the mounting hole diagram to measure and cut a mounting Hole.
Mount the unit using four #8 PH (0.164” x 0.75”) screws for the controller
Warning
RV manufacturers may use different wiring and wire colors for different RV floor plans. You
must ask RV manufacturers for proper instructions before any installation or modification of this
product. Incorrect connections may damage devices, cause fire or other lethal result.
You must contact the RV manufacturer or their authorized service for repairing or modification of
this product. Do not attempt to disassemble or adjust this product by unauthorized person.
Always disconnect the product from the power source (battery, converter, solar power. Etc.)
before removal, repairing, or installation of this product.
Read this User Manual carefully before using this product. Failure to follow the instructions
could result in personal injury, including death.
Check RV and its surroundings carefully, especially the slides and awning area, before operations
Must keep unauthorized users, especially children, away from this device
This product must be installed or stored in dry area. Do not expose this product to moisture or
water.
The device manufacture is not liable if the users violates the instructions in this manual.