Owner`s manual

15
2-Channel Amplifier - Functions & Controls
Q 200.2 / Q 300.2
BASS-EQ - Control
Allows to adjust the bass boost
from +/-18dB
STATUS - LED
Green Light indicates the amplifier is in
operation-mode.
Red Light Indicates the fault operation
of the amplifier. When the fault
conditions (overload, excessive heat or
short circuit of speaker) arise, the
protection curcuit is engaged to protect
both the speakers and the amplifier
against damage. Attend in this case
TROUBLE SHOOTING on page 23.
FILTER / XOVER - Switches & Controls
Position HP - Highpass ist activated, the frequency of the speakers is bounded below.
The threshold is from 50Hz to 250Hz by XOVER Control adjustable.
Position LP - Lowpass ist activated, the frequency of the speakers is bounded above.
The threshold is from 50Hz to 250Hz by XOVER Controladjustable.
Position OFF - full range output signal
GAIN - Control
Allows to adjust input level from head unit
INPUT - RCA
Allows to connect the amplifier with the head unit via RCA cable.