.5 V ‘S R L E A N U W N O A M 1 VN710 VW-U1
INTRODUCTION Always follow the instructions in this manual before using the device. Please keep this manual easily accessible in the vehicle for future reference. Features • iGo Primo, 3D Navisoftware with TMC on 8GB SD card, 46 countries including Turkey with Points of Interests display and search function, 3D building views, TTS voice output, warnings, over 25 system and prompt languages. Latest Map Guarantee (30 days) after activation via www.naviextras.com. • High-resolution 17.
INDEX Safety Information....................................................................................................................................4 Basic functions.........................................................................................................................................6 Operating elements..................................................................................................................................................................6 Main menu........
SAFETY INFORMATION • In general, the assembly and installation of the device must be performed by a trained and technically skilled specialists, as the installation and connection of the device requires complex knowledge. • This device is only suitable for the operation in a vehicle with an on-board voltage of 12 volts, negative ground. • Improper installation or use may void the warranty. • Note any time the traffic regulations of the country in which the device is operated.
SAFETY INFORMATION • The device supports only DVD/CD standard disk size of diameter with 12 cm. Do not attempt to insert disks with a different size or any other object into the disk slot. Be sure to load only one disk at the same time. • Please use only the included original accessories. Ensure a sufficient mounting of the device by using the included installation accessories, as in the event of an accident enormous accelerations may occure.
BASIC FUNCTIONS OPERATING ELEMENTS 1 2 3 4 5 6 10 7 11 8 12 9 13 17 14 15 16 1. Turn the display on / off. 11. Open the radio mode. 2. Start or pause the media playback. 12. Open the audio player. 3. Slot for CD/DVD disks (Ø 12 cm). 13. Open the phone mode. 4. Eject the inserted CD/DVD. 14. Power on / off (short tap). Volume controller (rotate). 5. Open the DVD/CD player menu. 6. Open the main menu. 7. Skip to the next track/title/station/chapter. 8.
BASIC FUNCTIONS MAIN MENU After power on, the device displays the main menu. By pressing the „MENU“ button on the device, you can always get to the main menu too. 1 2 3 1. Depending on the selected design theme (Skin), the current date and time will be displayed here. 2. On some vehicle models the A/C display information is shown here. This information will only appear if you make adjustments on the Climatronic.
BASIC FUNCTIONS NAVIGATION Open the navigation application by tapping „Navigator“ in the main menu or by pressing the „NAVI“ button on the device. Please refer to the separate manual for the navigation software. The device provides the ability to use any navigation software (Windows CE 6.0 compatible). Patch the navigation software (on microSD card) with the device as follows: Tap on „Apps“. Tap on „Options“. Tap on „System“. Tap on „Browse“.
BASIC FUNCTIONS AUDIO PLAYER Open the audio player by tapping „Music“ in the main menu or by pressing the „MUSIC“ button on the device. The audio player supports audio formats like MP3, WMA and WAV. Refer to page 14 for CD Audio playback. 1 2 3 4 5 6 7 9 8 10 11 1. Current audio file information. 2. Level meter display of the current title. 3. Current time. 4. Tap here to enter the main menu without interrupting the playback of the current title. 5.
BASIC FUNCTIONS Playback mode and playlist Tap on „Menu“ and then on: „Scan“ for a short playback of each song in the playlist. „Random“ for a randomized playback within all titles. „Repeat“ to replay the current title. „Save playlist“ to save the current playlist on „Local“. „Clear list“ to delete the current playlist. Tap on „Open Audio File“ to open the file manager. Now you can add audio files from the local disk or connected USB stick or MicroSD card to your current playlist.
BASIC FUNCTIONS RADIO Open the radio application by tapping „Radio“ in the main menu or by pressing the „RADIO“ button on the device. 1 2 3 4 5 6 7 8 9 11 10 12 13 1. Displays the current frequency band and the current station frequency, tap here for directly quick tuning. 2. Current time. 3. PTY category of the current station. 4. Tap here to enter the main menu without interrupting the radio playback. 5. Tap here to exit the application, the playback will be interrupted. 6.
BASIC FUNCTIONS Settings and station presets Tap on the „gear icon“ to open the settings and then: „Rename Station“ to rename the current radio station. „Delete Station“ to delete the current radio station from the presets. „Delete All Stations“ to delete all radio stations from the presets. „Local Setting“ to open the settings for the local radio frequency standards. Tap on „Audio“ to open the audio settings. Refer to the instructions in section „Audio“ in the „APPS“ menu.
BASIC FUNCTIONS RDS functions This device supports RDS (Radio Data System) in the frequency range 87.5 - 107.9 MHz FM. The following RDS functions are only available if they are supported by the selected radio station. AF (Alternative Frequency) The AF function enables the automatic switching of the receiving frequency when leaving the reception range of a transmitter.
BASIC FUNCTIONS DVD (DVD/CD-Player) The DVD player supports the following formats: DVD, DVD-R/RW, DVD+R/RW, VCD, CD, CD-R/RW, MP3. Open the DVD application by tapping „DVD“ in the main menu or by pressing the „DVD“ button on the device. Tap during DVD playback on any spot on the display to open the DVD menu. When you playback a CD or MP3-CD, the user interface is different. 1 4 5 6 7 8 2 9 3 10 1. Tap here to eject the inserted disc. 6. Tap here for fast backward. 2.
BASIC FUNCTIONS 1 2 3 1. Tap here to open the System Settings of the DVD player, where general settings, audio settings, video settings and language settings can be specified. 4 5 6 7 3. Tap here to set the subtitle options of the currently inserted media. 4. Tap here to open the title menu. 5. Tap here for the information of the currently inserted media. Tap again to hide the display. 6. Tap here to open the main menu of the currently inserted media. 7.
BASIC FUNCTIONS BLUETOOTH™ Open the Bluetooth™ application by tapping „Bluetooth™“ in the main menu or by pressing the „PHONE“ button on the device. PAIRING At first pair the devices, if necessary refer to the manual of your mobile phone. Open the „Settings“ menu on your mobile phone and open the Bluetooth settings. Turn on Bluetooth and then search for compatible devices. The Bluetooth name of the device will be displayed.
BASIC FUNCTIONS CONTACTS AND CALL HISTORY Once your mobile phone has been connected via Bluetooth to the device, the synchronization of your contacts and call history starts automatically. Tap on „Contacts“. Tap on a name to start a phone call. Tap on the white search field to search for a contact, by typing its name on the screen keyboard. Tap on „History“. Tap on „Missed“ to display the missed phone calls. Tap on „Received“ to display the already received phone calls.
BASIC FUNCTIONS Tap on „Dialled“ to display the already transacted phone calls. To synchronize your contacs and call history tap on „Sync. Now“. TASTATUR Tap on „Keypad“ to enter phone numbers manually. Then enter the desired number and then tap the green phone icon to start dialing. Tap the red phone icon to end the phone call. You can dial with the paired mobile phone, but this is not recommended while driving and may be illegal in your country.
BASIC FUNCTIONS APPS Open the application menu by tapping on „Apps“ in the main menu. The device offers a variety of applications that can be used as described below. Some of these functions require the appropriate accessories. 1 2 3 4 5 6 7 8 9 10 1. Tap here to switch off the display. To switch on the display again, tap onto the screen or push the „DISP“ button on the device. 6. Tap here to start the Internet browser (Refer to the notes on page 22). 7. Tap here to open the Audio Settings. 2.
BASIC FUNCTIONS iPod™ (optional) Make sure that the iPod™ is properly connected to the device via the supplied cable. This cable allows also the connection of an iPhone™ (until 4S) to use its built-in audio playback mode. The battery is charged via the connecting cable when the device is switched on. With older iPod ™ models, it may occur, that they will not be detected, after the device was switched off. Disconnect and connect again the iPod ™ in this case.
BASIC FUNCTIONS TV/DAB+ (optional) The device offers the possibility to connect and operate a separate TV tuner (DVBT) for the reception of digital TV signals. Optionally, it is also possible to connect and operate an external digital radio receiver (DAB, DAB+). Depending on the model the touchscreen function is enabled. Please refer to the manual of the connected tuner. Files With the file manager, it is possible to manage and open computer specific file formats.
BASIC FUNCTIONS Tap on „Options“ to perform file operations, such as deleting or copying files. With the copy function, it is possible to move files to another location or to another disk. Once you have open an image file, you can start a slideshow of all the pictures stored in the directory. Tap on the image and the playback options are displayed. Tap on „Info“ to view the memory information of each storage locations.
BASIC FUNCTIONS Audio You can open the audio settings in the main menu by tapping on „Apps“ and „Audio“ or by pressing the right rotary control (except while DVD/TV playback) on the device. Sound adjustment Acoustic center Tap on one of the control bars to change the sound adjustment. Tap on one of the seating positions or on the arrows to align the front and rear speakers. Equalizer Tap on „EQ“. Tap on one of the preset equalizer presets.
BASIC FUNCTIONS Advanced Audio Settings Tap on „Advance“ to open the menu for the advanced audio settings. On the left under „Pre-Channel Volume“ you can set the individual volume for each application. Just tap on the arrow icons to change the value upward or downward. Scroll down the left field to display all applications. Under „MISC“ and „Key Beep“ you can activate or deactivate a key tone for every interaction. Under „Audio Channel“ you can set the output signal from 4 to 5.1-channel signal.
BASIC FUNCTIONS Scroll down on the right to get to the crossover settings for the subwoofer and a center speaker. This is only useful if a subwoofer or center speaker is used. Subwoofer (optional) Under „Frequency“ you can set the cut-off value and only the frequencies below this value will be played via the subwoofer. This relieves the subwoofer and improves the sound. With „Gain“ you can set the desired level of the subwoofer signal .
BASIC FUNCTIONS Options You can open the Options by tapping on „Options“ in the „Apps“ menu. Language settings Tap on „Skin“. Select the desired language. Tap on „Apply“. User interface Tap on „Skin“. Tap on the menu „Skins“ and select the desired design theme (skin). Tap on „Apply“. Operating system Under „System“ you find information about the system.
BASIC FUNCTIONS Date/Time Tap on „Date/Time“. Select the desired time zone. Set the current date. Set the current time. Tap on the checkbox right to set on daylight saving time. Tap on the checkbox left to set the time format to 12-hours (AM / PM). Tap on „Apply“. Please operate complex settings as a driver generally only if you have parked the car, otherwise the traffic safety is endangered. Otherwise you can not react in time, to avoid occuring danger situations.
BASIC FUNCTIONS Display Tap on „Display“. Set the desired brightness level for the display. The checkbox „CCD Camera“, enables the optional rear view camera function. As soon as reverse gear is engaged, the transmission of the video camera is automatically displayed on the screen. With the checkbox below, the media playback will be paused when the reverse gear is engaged. Calibration of the touchscreen operation If the touchscreen function is inaccurate you can recalibrate the display.
CUSTOM SETTINGS Menu assignment You have the possibility to arrange the main menu or apps menu to your liking. To change the position of a control panel, press and hold for 5 seconds the regarding panel in the main or apps menu until the dashed lines are visible. Then hold and slide the control panel to the desired position within the menu. To occupy a control panel with a new function, touch the control panel for 1-2 sec. to open the edit menu. Tap on „Delete“ to remove the panel.
CUSTOM SETTINGS Wallpaper You have the possibility to customize the background image to your liking. First, copy the desired wallpaper file to the microSD card, the USB stick or on the local hard drive. Tap on „Apps“. Tap on „Options“. Tap at „Wallpaper“ on „Browse“ Select a file by double click. Tap on „Apply“ to confirm your selection or „Delete“ below to remove the current file. Alternatively you can set an already opened image as your wallpaper. Tap on „Options“ and select „Set as Wallpaper“.
CUSTOM SETTINGS Bootlogo You have the possibility to customize the bootlogo (startup logo) to your liking. First, copy the desired file to the microSD card, the USB stick or on the local hard drive. Open the desired file in the file manager by double click. Tap on „Options“ and select „Use as Startup Logo“. Tap on „OK“ and restart the device. Button illumination You have the possibility to change the color of the button illumination on the device (only in night driving mode).
ADVANCED OPERATIONs INFRARED REMOTE The included remote control allows you to control some basic functions on the device. Point directly with the front of the remote control to the screen of the device.The distance should not be more than 3 meters. If you use the remote control for the first time, you have to remove the safety foil in the battery compartment on the back. Here is an overview of the basic functions of the remote control, which can be different depending on the currently running application.
ADVANCED OPERATIONS MULTI-FUNCTION STEERING WHEEL The device supports a control via the standard multifunction steering wheel.The control buttons are corresponding to the basic function of the device. The operation may vary slightly from car model to car model and may be limited. The driver information display between the speedometer display is also supported by the device and shows e.g.
TROUBLESHOOTING If the following troubleshooting tips do not solve the problem and the malfunction persists, please contact an authorized repair or installation service. Do not open the device or attempt to repair it by yourself. This may cause serious damages to the electronic components of the device and in your vehicle or may void the warranty of the device. Problems Starting process The device cannot be turned on. Display Inaccurate or delayed input of touchscreen function. Screen is black.
TROUBLESHOOTING Remedy Problems Causes CD/DVD playback The DVD menu can not be opened. The disc does not support menus Insert another disc. or is plagiarism. The picture quality during playback is insufficient. Brightness, contrast and color saturation are set too low. Check the DVD player settings and correct them. Erroneous or disrupted playback. The disc is not loaded correctly. Insert the disc again with the print side up. The disc is scratched, broken or deformed. Insert another disc.
TROUBLESHOOTING Problems Causes Remedy Navigation The navigation application will not start. The software is not compatible with the device. Check the compatibility of software with Windows CE 6, or get yourself a compatible version. The software was not installed on the device properly. Check the settings under Apps - Options - System and if necessary, correct the navigation software path. The license of the installed software or the useful life has expired. Contact the software supplier.
TROUBLESHOOTING Problems Causes Remedy Bluetooth/Phone No connection or pairing of the devices. Bluetooth function of the phone is not enabled. Enable Bluetooth function in the phone settings. Bluetooth enabled but the phone is not visible. Enable „visible“ in the phone settings. The Bluetooth standard of the phone is not compatible. Use a compatible phone. Too many Bluetooth devices are registered in the device. Delete unused Bluetooth devices from the storage of the device.
GENERAL INFORMATION Care and Maintenance This device is equipped with high precision and sensitive technique and should always be treated with caution. Please note the following tips to avoid endangering the warranty and extend the life of the appliance. • Children under 12 should not operate the device. Keep the device and all accessories away from small children. • Keep the device and its components dry.
GENERAL INFORMATION Legal Notice • ESX or Audio Design GmbH are in no way affiliated with the Volkswagen AG or any of its subsidiaries or affiliated companies connected to, or is acting on its behalf or with its authorization. • All registered product names, trade marks and brands are the property of their respective owners. • This owner‘s manual was made with the utmost care. • If you need to dispose the device, be aware that no electronic devices should be deposed in the household waste.
DESIGN ESX Car Media Systems · Audio Design GmbH Am Breilingsweg 3 · D-76709 Kronau/Germany Tel. +49(0)7253 - 9465-0 · Fax +49(0)7253 - 946510 www.esxaudio.de - www.audiodesign.
