Installation Sheet

1
2
WARNING!
This fixture may be dimmed
using standard triac dimmer.
For maximum adjustability We
recommend Lutron CL series
dimmers.
1.Turn breaker off for circuit on outlet
where fixture is to be installed.
2.Remove mounting bracket from
fixture and install to electrical
box(Figure 1)
3.Wire fixture to wires in outlet
box.Green wire is for Ground.
4.Install fixture to back-plate and
tighten 2 nuts so that fixture meets
the wall.(Figure 3)
5.Remove protective paper from
fixture.(Figure 4)
6.Install glass into holder using 2
screws supplied.(Figure 5)
3
4
5
Installation Instructions
Model E22772-91PC
TM