PRODUCT NAME: Centrum ITEM NUMBER: E23316-24PC Please consult a qualified electrician for hanging fixture and wiring.
Before Getting Started Antes de comenzar Read the instructions carefully prior to assembling the product. Lire attentivement les instructions avant d'assembler le produit . When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. Lorsque vous ouvrez le paquet avec un outil pointu comme un couteau de coupe, veillez à ne pas endommager les composants à l'intérieur . Carefully remove all packaging materials and retain for future use.
Contents Before getting,started,ensure the package contains the following components: Antes de comenzar, asegurese de que el paquete contenga los siguientes componentes: Antes de commencer, assurez-vous qu le paquet contient les composants suivants: X1 A FIXTURE B X1 MOUNTING BRACKET C X3 WIRE NUTS X2 D HEXAGON INNER SCREW E X1 Hex Wrench Page 3 of (5)
1. Before installing please double check the glass is good, then push the screw into the hole and tighten up the screws with a hex wrench until the fixture installed E 2. 1. Take off the hole cover ; 2. Push the wire in the hole and press it down with your finger at the hole in the flat plate ; 3. Tighten the screws with a hex wrench and cap the hole cover . D 3.
ground wire green wire (L)positive (N)neutral 4. 5.
