User's Manual

– 6 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
ETA-ECM2063
AC Power Distribution Sequencer
RACEWAY AC INLET KNOCKOUTS
The ETA-ECM2063 can support up to three AC conduit inlets at each end. There are three knockouts on both the top and the bottom of
the raceway. Each inlet supports a double knockout size supporting standard USA electrical fittings of
1
⁄2" and
3
⁄4". The figure below is an
illustration of one end of the raceway.
RACEWAY MOUNTING RAILS
The ETA-ECM2063 raceway has breakaway rail mounting tabs that make it convenient to secure the raceway in most applications.
There are four rails to secure the ETA-ECM2063 to a cabinet or wall. Multiple slots are provided for ease of installation. To break the
rail tabs off, simply bend the rail tabs back and forth with a pair of pliers until the metal separates. Note: After the metal breaks, sharp
corners may need to be filed to prevent injury.
36.84
3.26 5.25
2.59
36.84
3.26 5.25
2.59