Specifications

– 7 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
FRONT PANEL FEATURES
1. Unswitched AC Outlet – Thetwo120VACoutletsarealwayslivewhentheETA-ECS3powercordispluggedintoanACmains
powersourceandvoltageispresent.Ifvoltageispresentattheoutlets,itwillbedisplayedontheACMainsMeter.Note:TheAC
mains power switch or sequencer section does not affect the Unswitched AC Outlets. The Unswitched Outlets are protected by
thesurgeprotectioncircuitry,butwillnotbeshutoffbytheEVScircuit.
2. AC Mains Breaker – The15AratedbreakerwillopenifthecombineddrawofallACoutletsexceeds15A.Note:Thebreakersare
designed to exceed their rating for a short period of time. If the breaker is tripped, to reset you must first remove the load from
theETA-ECS3andpushthecenterbuttononthebreaker.
3. System Activation Switch – ToturntheETA-ECS3OnorOff,pressthemomentaryswitchonce.
4. Pull Out Light – TheLEDlightisdesignedtobepulledoutwhenneeded.
5. Pull Out Light Dimmer Switch – ThePullOutLightcanbeturned“On”or“Off”bythisswitch.Therearealsotwobrightness
settings.
ETA-ECS3
Power Sequencer & Conditioner
1 2 3 4 5