Technical data

Flow Meter FC01-Ex Flow Meter FC01-Ex
14 Ex atmosphere - Definitions and mounting instructions 14 Ex atmosphere - Definitions and mounting instructions
6 ANAO2 analogue output 2 - temperature
7 ANA2GND reference potential for analogue output 2
8 NC none
XAH - Limit value signal outputs - relay outputs - change over contacts
Connection by 8 pole connector; A
max
= 1.5 mm
2
, LiYCY 3 x 0.38 mm
2
cable recommended,
stripped length 6.5 mm
Pin No. Signal name Function
1 SGNDL1 shield ground 1
2 LIM1 non-inverted signal output 1 (N/O)
3 LIM1COM common change over input 1
4 /LIM1 inverted signal output 1 (N/C)
5 SGNDL2 shield ground 2
6 LIM2 non-inverted signal output 2 (N/O)
7 LIM2COM common change over input 2
8 /LIM2 inverted signal output 2 (N/C)
XAH - Signal outputs - transistor outputs (NPN, freely connectable)
Connection by 8 pole connector; A
max
= 1.5 mm
2
, LifYCY 4 x 2 x 0,2 mm
2
cable recommended,
stripped length 6.5 mm
Pin No. Signal name Function
1 /ERROR E summarized error indication - emitter terminal
2 /ERROR C summarized error indication - collector terminal
3 /BUSY/PULSE E availability signal or frequency output -
emitter terminal
4 /BUSY/PULSE C availability signal or frequency output -
collector terminal
5 LIM2 E limit value 2 - emitter terminal
6 LIM2 C limit value 2 - collector terminal
7 LIM1 E limit value 1 - emitter terminal
8 LIM1 C limit value 1 - collector terminal
6 ANAO2 analogue output 2 - temperature
7 ANA2GND reference potential for analogue output 2
8 NC none
XAH - Limit value signal outputs - relay outputs - change over contacts
Connection by 8 pole connector; A
max
= 1.5 mm
2
, LiYCY 3 x 0.38 mm
2
cable recommended,
stripped length 6.5 mm
Pin No. Signal name Function
1 SGNDL1 shield ground 1
2 LIM1 non-inverted signal output 1 (N/O)
3 LIM1COM common change over input 1
4 /LIM1 inverted signal output 1 (N/C)
5 SGNDL2 shield ground 2
6 LIM2 non-inverted signal output 2 (N/O)
7 LIM2COM common change over input 2
8 /LIM2 inverted signal output 2 (N/C)
XAH - Signal outputs - transistor outputs (NPN, freely connectable)
Connection by 8 pole connector; A
max
= 1.5 mm
2
, LifYCY 4 x 2 x 0,2 mm
2
cable recommended,
stripped length 6.5 mm
Pin No. Signal name Function
1 /ERROR E summarized error indication - emitter terminal
2 /ERROR C summarized error indication - collector terminal
3 /BUSY/PULSE E availability signal or frequency output -
emitter terminal
4 /BUSY/PULSE C availability signal or frequency output -
collector terminal
5 LIM2 E limit value 2 - emitter terminal
6 LIM2 C limit value 2 - collector terminal
7 LIM1 E limit value 1 - emitter terminal
8 LIM1 C limit value 1 - collector terminal