Technical data

Flow meter FC01-Ex Flow meter FC01-Ex
Operation 39 Operation 39
5.1.1.8 Display (menu option: DISPLAY SELECT)
The FC01-Ex enables the user to define certain points of the display.
When the first line of the LC display in the main menu indicates the flow rate in the unit select-
ed as well as the medium temperature in °C, °F, or K, it is possible to select the 2nd line from
the following menu options (see para. 5.1.1.16).
* BARGRAPH Totalizer:
* LITRE/SECOND [l/s] * LITRE [l]
* LITRE/MINUTE [l/min] * METRE
3
[m
3
]
* METRE
3
/HOUR [m
3
/h] * FEET
3
[F
3
]
* GALLONS°/MINUTE * GALLONS° [° = US-GALLONS]
Where totalizer function has been selected, the totalizer will start at zero counting in the unit
selected (litre, m
3
or gallons).
When the display changes from m
3
to litre or gallons, or from litre or gallons to m
3
, the value
already counted will be converted.
The content of the totalizer is deleted by simultaneously pressing ▲ UP and ▼ DOWN, or when
the max. display value (99999999.9 l, m
3
or gallons) is reached. In both cases, the totalizer will
restart from zero.
Caution!
The content of the totalizer is deleted in the event of power failure or disconnection of the
power supply!
Skipping to the menu BARGRAPH or PIPE SIZE is effected depending on the selected menu
option.
5.1.1.9 Bar graph (menu option: BARGRAPH)
This menu option allows the user to set the bar graph as desired. The following settings should
be made:
* FLOW / TEMP = (bar graph assignment: flow rate/medium temperature)
* ZERO = (initial value of the bar graph)
* FS = (final value of the bar graph)
Independent of its assignment, the bar graph has a constant resolution of 10 segments.
When entering the initial or final value, the user should observe a reasonable resolution!
The bar graph also comprises the representation of the limit switch(es) as far as they can be indi-
cated in the bar range selected.
The representation of the limit switches in the bar graph depends on the switch-on value of the
limit switch.
For representation details see para. 6.2.1 (Operating data)
5.1.1.8 Display (menu option: DISPLAY SELECT)
The FC01-Ex enables the user to define certain points of the display.
When the first line of the LC display in the main menu indicates the flow rate in the unit select-
ed as well as the medium temperature in °C, °F, or K, it is possible to select the 2nd line from
the following menu options (see para. 5.1.1.16).
* BARGRAPH Totalizer:
* LITRE/SECOND [l/s] * LITRE [l]
* LITRE/MINUTE [l/min] * METRE
3
[m
3
]
* METRE
3
/HOUR [m
3
/h] * FEET
3
[F
3
]
* GALLONS°/MINUTE * GALLONS° [° = US-GALLONS]
Where totalizer function has been selected, the totalizer will start at zero counting in the unit
selected (litre, m
3
or gallons).
When the display changes from m
3
to litre or gallons, or from litre or gallons to m
3
, the value
already counted will be converted.
The content of the totalizer is deleted by simultaneously pressing ▲ UP and ▼ DOWN, or when
the max. display value (99999999.9 l, m
3
or gallons) is reached. In both cases, the totalizer will
restart from zero.
Caution!
The content of the totalizer is deleted in the event of power failure or disconnection of the
power supply!
Skipping to the menu BARGRAPH or PIPE SIZE is effected depending on the selected menu
option.
5.1.1.9 Bar graph (menu option: BARGRAPH)
This menu option allows the user to set the bar graph as desired. The following settings should
be made:
* FLOW / TEMP = (bar graph assignment: flow rate/medium temperature)
* ZERO = (initial value of the bar graph)
* FS = (final value of the bar graph)
Independent of its assignment, the bar graph has a constant resolution of 10 segments.
When entering the initial or final value, the user should observe a reasonable resolution!
The bar graph also comprises the representation of the limit switch(es) as far as they can be indi-
cated in the bar range selected.
The representation of the limit switches in the bar graph depends on the switch-on value of the
limit switch.
For representation details see para. 6.2.1 (Operating data).