Technical data

ManualsBrandsETA Systems ManualsOxygen EquipmentFC01-LQ

Flow Meter FC01-Ex Flow Meter FC01-Ex

40 Operation 40 Operation

Example:

Limit switch assignment: LS1  F LS2  T

Switch-on value LS2: 23 °C

Analogue bar graph assignment: medium temperature

Initial value - analogue bar graph: 20 °C

Final value - analogue bar graph: 30 °C

Instantaneous temperature value: 25 °C

→ resulting in the analogue bar graph display shown below.

Example:

Limit switch assignment: LS1  F LS2  T

Switch-on value LS2: 23 °C

Analogue bar graph assignment: medium temperature

Initial value - analogue bar graph: 20 °C

Final value - analogue bar graph: 30 °C

Instantaneous temperature value: 25 °C

→ resulting in the analogue bar graph display shown below.

20 °C 21 °C 25 °C 29 °C 30 °C

LS2 ON

fig. 15

5.1.1.10 Pipe size (menu option: PIPE SIZE)

To display a flow volume/time unit or a totalizer function it is necessary to indicate the pipe

diameter to calculate mass flow.

This is provided by selecting the pipe diameter in menu option PIPE SIZE comprising pipe

diameters from 10.0 to 460.0 mm.

5.1.1.11 Frequency output (menu option: FREQUENCY OUTPUT)

The totalizer function of the FC01-Ex has been expanded by the output of proportional quantity

pulses. The function can only be displayed by version FC01-Ex-U1T4 (open collector outputs).

The proportional quantity pulses have been determined as follows:

Example: 1 pulse / 10.0 [litre]

The frequency output will supply 1 pulse per 10 litres (totalized quantity)

1 pulse / quantity (totalizer unit selected)