Technical data

Flow meter FC01-Ex Flow meter FC01-Ex
Operation 43 Operation 43
Example: Changing the limit switch assignment from LS1  F / LS2  T
to LS1  F / LS2  F
affects LS2 ON = 0.00
Parameter data: LS2 OFF = end of measuring range
Reason: Changing the physical assignment of limit switch 2 will adjust its switch-on
and switch-off values to the new assignment (flow rate).
An overview of the configuration menu and a summary of the measuring ranges and menus
available for the sensor type selected are shown on the following pages.
Example: Changing the limit switch assignment from LS1  F / LS2  T
to LS1  F / LS2  F
affects LS2 ON = 0.00
Parameter data: LS2 OFF = end of measuring range
Reason: Changing the physical assignment of limit switch 2 will adjust its switch-on
and switch-off values to the new assignment (flow rate).
An overview of the configuration menu and a summary of the measuring ranges and menus
available for the sensor type selected are shown on the following pages.