Technical data

Flow meter FC01-Ex Flow meter FC01-Ex
On-line phases 55 On-line phases 55
6.2.1.2 Peak values (menu option: PEAK VALUE MIN / PEAK VALUE MAX)
The FC01-Ex comprises four specific measured-values memories.
They store the lowest and highest value of flow rate and medium temperature.
6.2.1.2 Peak values (menu option: PEAK VALUE MIN / PEAK VALUE MAX)
The FC01-Ex comprises four specific measured-values memories.
They store the lowest and highest value of flow rate and medium temperature.
After switch-on or NOT-BUSY indication, the minimum and maximum values are deleted and will
be continuously updated (non-return pointer principle).
The peak values may be retrieved in the main menu and are deleted by simultaneously pressing
▲ UP and ▼ DOWN.
Caution!
Power failure or disconnection of the power supply will delete the contents of the four
measured-values memories.
6.2.1.3 Last error (menu option: LAST ERROR)
The last main menu option to be called is the error memory.
This error memory comprises the number of the last error (see section 7). It may be very helpful
when commissioning the FC01-Ex.
Other than the peak value memories described above, the contents of this memory will be
retained even upon failure.
The user may purposely delete the error memory in the condition selected by simultaneously
pressing ▲ UP and ▼ DOWN.
MIN VALUE
Flow rate
MAX VALUE
Flow rate
MIN VALUE
Medium temperature
MAX VALUE
Medium temperature
fig. 19
MIN VALUE
Flow rate
MAX VALUE
Flow rate
MIN VALUE
Medium temperature
MAX VALUE
Medium temperature
fig. 19
After switch-on or NOT-BUSY indication, the minimum and maximum values are deleted and will
be continuously updated (non-return pointer principle).
The peak values may be retrieved in the main menu and are deleted by simultaneously pressing
▲ UP and ▼ DOWN.
Caution!
Power failure or disconnection of the power supply will delete the contents of the four
measured-values memories.
6.2.1.3 Last error (menu option: LAST ERROR)
The last main menu option to be called is the error memory.
This error memory comprises the number of the last error (see section 7). It may be very helpful
when commissioning the FC01-Ex.
Other than the peak value memories described above, the contents of this memory will be
retained even upon failure.
The user may purposely delete the error memory in the condition selected by simultaneously
pressing ▲ UP and ▼ DOWN.