Technical data

Flow meter FC01-Ex Flow meter FC01-Ex
Appendix Appendix
Start-up (reset) Start-up test active Error No. 1 Error No. 2 Error No. 3 Error No. 4 Error No. 5 Heating period active Normal duty Configuration active Parameter selection active Error No. 50 Error No. 10 Error No. 20 Error No. 21 Error No. 30 Error No. 31 Error No. 60 * Error No. 40 Error No. 41
Appendix 1 - Performance of the digital and analogue outputs during the operating and error modes
Duty/
Error status
LIMIT
SWITCH 1
LIMIT
SWITCH 2
NO ERROR
NOT BUSY and
FREQUENCY
OUTPUT
ANA OUT
FLOW
ANA OUT
TEMP.
ON
OFF OFF OFF OFF OFF OFF OFF
X
OFF OFF OFF OFF
X
OFF
X X X X X
ON
OFF OFF OFF OFF OFF OFF
ON
ON
ON ON
OFF OFF OFF OFF OFF OFF OFF
Y Y
ON
OFF OFF OFF OFF OFF OFF OFF
ON
OFF OFF OFF OFF
ON
OFF
ON ON
FA
ON ON
MAX
MIN MIN MIN MIN MIN MIN MIN
X
MIN MIN MIN MIN
X
MIN
X X X X X
MAX
MIN MIN MIN MIN MIN MIN MIN
X
MIN MIN MIN MIN
X
MIN
X X X X X
X = standard performance Y = OFF pulse FA = frequency output 10 Hz
Note: The occurrence of error No. 40/41 will always cause an internal reset.
Status of the outputs prior to the error status described → see start-up (reset)
ON
OFF OFF OFF OFF OFF OFF OFF
X
OFF OFF OFF OFF
X
OFF
X X X X X
* When frequency output has been selected.
Start-up (reset) Start-up test active Error No. 1 Error No. 2 Error No. 3 Error No. 4 Error No. 5 Heating period active Normal duty Configuration active Parameter selection active Error No. 50 Error No. 10 Error No. 20 Error No. 21 Error No. 30 Error No. 31 Error No. 60 * Error No. 40 Error No. 41
Appendix 1 - Performance of the digital and analogue outputs during the operating and error modes
Duty/
Error status
LIMIT
SWITCH 1
LIMIT
SWITCH 2
NO ERROR
NOT BUSY and
FREQUENCY
OUTPUT
ANA OUT
FLOW
ANA OUT
TEMP.
ON
OFF OFF OFF OFF OFF OFF OFF
X
OFF OFF OFF OFF
X
OFF
X X X X X
ON
OFF OFF OFF OFF OFF OFF
ON
ON
ON ON
OFF OFF OFF OFF OFF OFF OFF
Y Y
ON
OFF OFF OFF OFF OFF OFF OFF
ON
OFF OFF OFF OFF
ON
OFF
ON ON
FA
ON ON
MAX
MIN MIN MIN MIN MIN MIN MIN
X
MIN MIN MIN MIN
X
MIN
X X X X X
MAX
MIN MIN MIN MIN MIN MIN MIN
X
MIN MIN MIN MIN
X
MIN
X X X X X
X = standard performance Y = OFF pulse FA = frequency output 10 Hz
Note: The occurrence of error No. 40/41 will always cause an internal reset.
Status of the outputs prior to the error status described → see start-up (reset)
ON
OFF OFF OFF OFF OFF OFF OFF
X
OFF OFF OFF OFF
X
OFF
X X X X X
* When frequency output has been selected.