Installation manual

Controls
12
Group Control
Group up to 64 devices by refrigerant circuit, floor, tenant, department,
area, or any desired category. ACP controls and monitors device operating
schedules, room temperatures, and other operating parameters.
Advanced
Control Platform
(ACP)
Without Digital I/O
(PQCPA11A0E)
With Digital I/O
(PQCPB11A0E)
The LG Advanced Control Platform (ACP) central controller combines ease
of installation and deployment with robust options for administrating and
managing the operation of LG’s air conditioning products through a standard
internet web browser.
The networkable ACP is designed around an IP architecture that is scalable
to the largest multi-tenant, commercial and institutional projects. The ACP
can accommodate up to 256 Multi V indoor units and integration accessories
spread across a maximum of 64 systems per controller. The browser based
graphical user interface provides system administrators with practical options
for optimizing efficiencies and occupant comfort while reducing the service and
maintenance burden.
Offered in 2 models, an ACP controller with digital input and output points
is available to prepare system administrators for future improvements and
additions to the LG V-Net control family.
Control
• Unit operation – Run/Stop
• Mode change – Cool/Dry/Fan/Auto/Heat
• Fan speed – Low/Medium/High/Auto
• Zone controller lockout-Setpoint Lock/Mode
Lock/All Lock
• Discharge louver swing – Run/Stop
• Setpoint temperature (°F or °C) selectable
Zone
• Zone controller lockout – Setpoint Lock/Mode Lock
• Discharge louver swing – Run/Stop
• Room temperature (°F or °C) selectable
• Alarm – Network Error/System Error/Error Code
Monitoring
• State – Run/Stop
• Mode – Cool/Dry/Fan/Auto/Heat
• Fan speed – Low/Medium/High/Auto
Tabbed Navigation
• Air Conditioner
• Ventilator
• Schedule
• Peak Control
Indoor Unit Operating Status Display
• Display - Zones/Groups/Individual Units
• Local controller Locked/Unlocked
• Operating mode - Auto/Cool/Heat
• Unit operation - On/Off/Malfunction
• Discharge louver (swing) - On/Off
• Monitoring
• Error Log
• Watt Meter
• Settings
Requires 120 volt power.