Installation manual

Controls

Device Setpoint Data Display Status

• Display device type - Indoor Unit/Ventilator/AWHP (Air-to-Water Heat Pump)/On-Off Unit

• Display device by Zones/Groups/Individual Units

• Indoor unit average temperature setpoint - Zones/Groups

• Indoor unit average room temperature - Zones/Groups

Temperature Control (ºF or ºC)

• Cooling range: 64-86 °F

• Heating range 60-86 °F

Conserve Energy

ACP may be programmed to start and stop each device based on a

customizable 7 day schedule and an annual calendar for exception days.

Multiple schedules can be created for larger facilities that accommodate variable

occupancy patterns. In addition to scheduling, the Peak Wattage function will

limit peak energy usage by cycling indoor units in sequence limiting the number

of air conditioning units on at any given time. Local zone controller functions may

be locked out using the ACP.

Operating Schedule Setup

• Set by Device/Group/All

• Set Mode/Temp/Fan Speed/Local Controller Lock

• Set by Hour/Period/Day/Month/Year/Holiday

• Event driven weekly and daily schedule patterns

• Set by user configurable equipment groups

• Calendar-based schedule start and end dates

• Calendar-based exception dates for holidays and other observances

PDI (Power Distribution Indicator)

When combined with PDI, the ACP allows calculated apportioned outdoor unit

power consumption data to be viewed and saved over the web.

Options and Accessories

• Digital Output Kit (PQNFP00T0)

Indoor Unit Monitoring Display

Scheduling Power Demand Control/Status

Indoor Unit Control