User Manual

4 Source 4 WRD
Specifications
Typical Power Consumption
Idle Power / Current DMX Mode: 1.2W/.046A; AC Mode: 0W
Full Intensity Power / Current 155.7W/1.35A
Physical
• Rugged die-cast aluminum construction
• Advanced thermal management systems for long LED life
• Ambient operating temperature: 5°–50°C (41°F–122°F)
• Minimum storage temperature: 5°C (41°F)
•Weight:
- Source 4
WRD LED retrofit kit only: 3.65 lb (1.66 kg)
- Source 4WRD LED installed on 26° fixture with yoke and
C-clamp:14 lb (6.35 kg)
Electrical
• 114–125VAC 60Hz power input
• 155W draw at full (182W theoretical max. draw)
• Recommended two (2) fixtures per dimmed circuit
(D20 module)
• Max of 14 fixtures per non-dimmed circuit (R20 module)
• If using in DMX mode: Connect fixture to relay, constant
power, or dimmer with regulation off and parked at full
LEDs
• 4 CREE LED modules
• 30,000 hour estimated L70 rating (life-test in progress,
results pending)
Optical • Compatible with all ETC Source Four lens tubes
Control
• DMX512-A compliant
• DMX in and thru via two RJ45 connectors
• AC power for line-dimmed operation
• Simple seven-segment display and two-button user
interface includes local dimming control
Note:
Connecting both power and data from a SmartBar 1 to a
Source 4 WRD fixture may cause flickering.