Setup Guide

Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel [phone] Fax [phone]
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel [phone] Fax [phone]
Rome, IT Via Ennio Quirino Visconti, 11, 00193 Rome, Italy Tel [phone] Fax [phone]
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel [phone] Fax [phone]
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel [phone] Fax [phone]
Service: (Americas) [e-mail] (UK) [e-mail] (DE) [e-mail] (Asia) [e-mail]
Web: www.etcconnect.com Copyright © 2014 ETC. All Rights Reserved. Product information and specifications subject to change.
4370M2200
Rev B 2014-06
Page 1 of 2
Pour ne pas compromettre la protection contre les risques d’incendie, remplacer
par un fusible de même type et de mêmes caractéristiques nominales.
For continued protection against risk of fire, replace only with same type and
rating of fuse.
Make sure to keep the vents clear of any obstructions.
Before servicing Cobalt, you must switch off the power on the rear panel and
disconnect the power cord completely.
The USB ports cannot be used for charging devices such as cell phones.
* Cobalt ships with three ‘active’ Display Port-to-DVI adapters. If ‘passive’ adapters
are used, only two may be used at a single time. A third adapter must be an ‘active’
adapter. Displays using an ‘active’ adapter have a max resolution of 1920x1200.
For information about MIDI and Remote Trigger, please see the current Cobalt
User Manual / Help System.
Setup Guide
This setup guide provides identification of the inputs and outputs on the Cobalt 10 and Cobalt 20 control desks as
well as provides important information regarding initial setup and use. See the reverse side for specific information
regarding the Cobalt 10 control desk.
For information about specific control desk features, operation, configuration and servicing, please reference the
built-in help system provided in the Cobalt operating software. Alternatively, you can download an electronic PDF of
the Cobalt User Manual from www.etcconnect.com or purchase a printed Cobalt User Manual, ordered separately
from ETC Customer Service.
Remote Trigger
Phone Remote
Dual-Mode
Display Port
Outputs*
Ethernet IEEE 802.3af
(compatible power
sourcing ports)
USB Ports
DMX512A /
RDM ports
MIDI Ports
(1x In, 1x Out)
IEC Power Input
Hard Power Switch
(I = on, O = off)
Switched Outlets
Keyboard Tray
USB Port
Desk Lamp
Desk Lamp Controls
Desk Lamp
Audio Line Out
(Audio Line In reserved
for future development)