Source Four HID PAR™ CE User Guide
DECLARAT ION OF CONFORMITY We, Electronic Theatre Controls, Europe Limited Unit 5, Victoria Industrial Estate, London W3 6UU United Kingdom declare under sole responsibility that the product: Product name: Source Four HID luminaires Product type/model: 405HID, 410HID, 419HID, 426HID, 436HID, 450HID, 41530 HID, 42550 HID, 426HIDJ, 436HIDJ, 450HIDJ, 2550HIDJ, PAR-EAHID, PARNel HID Lot: n/a Batch / Serial number: n/a Item numbers: one of each type to which this declaration relates is in conformity wi
English Source Four HID PAR CE guidelines Please note the following precautions prior to use: The Source Four HID PAR CE is intended for professional use only. Read the entire User Guide before using equipment. Please note the following safety precautions: • • • • • • • • • • • • • • • • The Source Four HID PAR CE is NOT dimmable. Dimming or regulated voltage will damage the ballast and void the warranty. Do not mount the Source Four HID PAR CE on or near a flammable surface.
English Wiring and power information A plug of at least 2.5 amp (220/240V) rating should be attached to the fixture’s mains lead. The wires in the mains lead are 1.5mm2 each and coloured in accordance with the following code: Green and Yellow: Earth Blue: Neutral Brown: Live WARNING: t 180°c The CE Source Four HID PAR CE must be earthed. Current rating: 240V/2.5 amp maximum Operating frequency: 50/60Hz Accessories ETC Part # Colour frame (19 cm sq./17 cm.
English Installing the lamp 1. Disconnect power to the Source Four HID PAR CE before installing the lamp. 2. Loosen the knurled bolt on the back of the lamp housing and pull the housing out. 3. Holding it by the base, remove the lamp from its box. Note: To avoid premature lamp failure, do not touch the lamp glass with your fingers. If you touch the lamp during installation, clean it carefully with rubbing alcohol and a clean, lintfree cloth before operation. 4. Insert lamp base into socket assembly.
English Lens identification Lenses for the Source Four HID PAR CE come in four versions. The type or beam spread can be identified by the lens texture.
English Installing a lens 1. Disconnect power to the fixture before handling. 2. Position the fixture with the front of the unit (the lens side) facing you, and tilted slightly (Figure 2). 3. Position the lens rotation ring with the spring clip at the top of the fixture, directly below the color frame retaining clip. 4. Hold the lens by the edge, and position it so the convex side faces the back of the fixture (Figure 4). 5.
English Housing assembly instructions If you take apart the Source Four HID PAR CE for any reason, please use the following steps for reassembly. Improper reassembly will result in void of warranty and loss of performance. Tools required: Phillips and flat head screwdrivers, rubber mallet, channel locks, pliers or crescent wrench. 1. Install the clutch plate (13) onto the left housing (3) and secure with nut (14). The right housing has three screw holes on its side, and one hole for the yoke bolt.
English Spare parts list 3,4 5,6 13,14 8 7 11 10 9 12 1,2 12 9 10 Source Four HID PAR CE Final Assembly Reference Number Part Number Description Quantity Required 1 7061A2022 S4 HID PAR base assembly (black) 1 2 7061A2022-1 S4 HID PAR base assembly (white) 1 3 7061A2203-0X CE HID PAR Lamp socket assembly (black) 1 4 7061A2203-1X CE HID PAR Lamp socket assembly (white) 1 5 7061A3039 HID PAR yoke bracket (black) 1 6 7061A3039-1 HID PAR yoke bracket (white) 1 7 HW5125 Bolt,
English Spare parts list Source Four HID PAR CE Housing Assembly Reference Number Part Number Description Quantity Required 1 7061A3014 Reflector, EA painted 1 2 7061A3025 Housing, right, PAR, painted 1 3 7061A3026 Housing, left, PAR, painted 1 4 7061A4001 Pad, silicon, reflector mount 4 5 HW391 Screw, .6350cmx1.9 cm PhPHMS, black zinc 3 6 7061A3005 Clip, gel retainer 1 7 HW750 Spring retainer 1 8 7060A4012 Lens rotation ring 1 9 HW3106 Screw, .6350 cmx.
English This page intentionally blank Source Four HID PAR CE 11
Americas 3030 Laura Lane, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel: +608 831 4116 +800 688 4116 Fax: +608 836 1736 +800 555 8912 Europe Unit 4, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel: +44 (0)20 8896 1000 Fax: +44 (0)20 8896 2000 Asia Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel: +852 2799 1220 Fax: +852 2799 9325 Web: www.etcconnect.com Email: (US) mail@etcconnect.