Source Four HID PARNel™ CE User Guide
DECLARAT ION OF CONFORMITY We, Electronic Theatre Controls, Europe Limited Unit 5, Victoria Industrial Estate, London W3 6UU United Kingdom declare under sole responsibility that the product: Product name: Source Four HID luminaires Product type/model: 405HID, 410HID, 419HID, 426HID, 436HID, 450HID, 41530 HID, 42550 HID, 426HIDJ, 436HIDJ, 450HIDJ, 2550HIDJ, PAR-EAHID, PARNel HID Lot: n/a Batch / Serial number: n/a Item numbers: one of each type to which this declaration relates is in conformity wi
English Source Four HID PARNel CE guidelines Please note the following precautions prior to use: The Source Four HID PARnel CE is intended for professional use only. Read the entire User Guide before using equipment. Please note the following safety precautions: • • • • • • • • • • • • • • • • The Source Four HID PARNel CE is NOT dimmable. Dimming or regulated voltage will damage the ballast and void the warranty. Do not mount the Source Four HID PARNel CE on or near a flammable surface.
English Wiring and power information A plug of at least 2.5 amp (220/240V) rating should be attached to the fixture’s mains lead. The wires in the mains lead are 1.5mm2 each and coloured in accordance with the following code: Green and Yellow: Earth Blue: Neutral Brown: Live WARNING: t 180°c The CE Source Four HID PARNel CE must be earthed. Current rating: 240V/2.5 amp maximum Operating frequency: 50/60Hz Accessories ETC Part # Colour frame (19 cm sq./17 cm.
English Installing the lamp 1. Disconnect power to the Source Four HID PARNel CE before installing the lamp. 2. Loosen the knurled bolt on the back of the lamp housing and pull the housing out. 3. Holding it by the base, remove the lamp from its box. Note: To avoid premature lamp failure, do not touch the lamp glass with your fingers. If you touch the lamp during installation, clean it carefully with rubbing alcohol and a clean, lintfree cloth before operation. 4. Insert lamp base into socket assembly.
English Color frame retaining clip usage The color frame holder is equipped with a spring-loaded retaining clip that prevents color frames and accessories from falling out. Make sure the Source Four HID PARNel has the color frame retaining clip in the locked position when hanging.(Figure 2) Note: Make sure to use colorframes or accessories with a 17cm inside diameter. 1. Release the retaining clip by pushing it sideways. The retaining clip opens. 2. Insert the color frame. 3.
English Lens identification The Source Four HID PARNel CE comes equipped with two types of lenses; Wave/Stippled (WS) and Wave/Clear (WC). The type can be identified by the lens texture. The WC rear lens is in a “fixed” position inside the fixture. The WS lens is in the rotating ring at the front of the fixture. The wave surfaces face each other. WS WC Wave / Clear lens Wave / Stippled lens Changing Source Four PARNel lenses Change lenses if they become cracked or badly scratched.
English Positioning the wave/stippled lens (front) • There are seven “notches” cut into the stippled side of the lens. Position the lens so that the cluster of three notches is on top. The center notch of the cluster coincides with the spring clip on the lens retaining ring. (Figure 6) • The bottom of the lens has a cluster of four notches. Place the two center notches behind the tabs at the bottom of the lens rotating ring.
English Spare parts list 3,4 5,6 13,14 8 7 11 10 9 12 1,2 12 9 10 Source Four HID PARNel CE Final Assembly Reference Number Part Number Description Quantity Required 1 7061A2022 S4 HID PAR base assembly (black) 1 2 7061A2022-1 S4 HID PAR base assembly (white) 1 3 7061A2024-0X 120V HID PAR Lamp socket assembly (black) 1 4 7061A2024-1X 120V HID PAR Lamp socket assembly (white) 1 5 7061A3039 HID PAR yoke bracket (black) 1 6 7061A3039-1 HID PAR yoke bracket (white) 1 7 HW5125
English Spare parts list 7 8 3 4 21 9 11 2 15 1 5 6 10 23 14 17 22 16 12 13 18 19 20 Source Four HID PARNel CE Housing Assembly Reference Number Part Number Description Quantity Required 1 7061A3005 Gel retainer clip 1 2 7061A3013 Spring clip rotator 1 3 7061A3014 Reflector, painted black 1 4 7061A3014-1 Reflector, painted white 1 5 7061A3025 Barrel, painted black 1 6 7061A3025-1 Barrel, painted white 1 7 70612019 Source Four PAR rivet assembly, black 1 8 706120
English This page intentionally blank Source Four HID PARNel CE 11
Americas 3030 Laura Lane, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel: +608 831 4116 +800 688 4116 Fax: +608 836 1736 +800 555 8912 Europe Unit 4, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel: +44 (0)20 8896 1000 Fax: +44 (0)20 8896 2000 Asia Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel: +852 2799 1220 Fax: +852 2799 9325 Web: www.etcconnect.com Email: (US) mail@etcconnect.
