Source Four MultiPAR™ CE User Manual
DECLARAT ION OF CONFORMITY We, Electronic Theatre Controls, Europe Limited Unit 5, Victoria Industrial Estate, London W3 6UU United Kingdom declare under sole responsibility that the product: Product name: Source Four MultiPAR Product type/model: MultiPAR 1x12 & MultiPAR 1x3 Lot: n/a Batch / Serial number: n/a Item numbers: one of each type To which this declaration relates is in conformity with the following Standards: EN60598-1:2000 Luminaires, General requirements and tests EN60598-17:1990 L
English Source Four MultiPAR CE guidelines The Source Four MultiPAR CE is intended for professional use only. Read the entire User Guide before using equipment. Please note the following safety precautions: • • • • • • • • • • • • • • • Do not mount the Source Four MultiPAR CE on or near a flammable surface. Use the Source Four MultiPAR CE in dry locations only, where humidity does not exceed 90 percent. The fixture is for indoor use only and is not intended for outdoor use.
English Installing the HPL lamp Always replace the lamp if it becomes damaged or deformed. Use care installing the lamp. Improperly installed lamps will cause premature lamp and socket failures. 1. Disconnect power before installing the lamp. 2. Let the lamp cool before replacing. 3. Loosen the captured screw on the back of the raceway and open the raceway lid. 4. The raceway lid is designed to remain open using gravity.
English Lens identification Lenses for the Source Four MultiPAR CE come in four versions. The type or beam spread can be identified by the lens texture. VNSP NSP Narrow spot Stipple glass (slight diffuse texture) 19° Round beam shape Very narrow spot Clear glass 15° Round beam shape MFL Medium flood Fewer facets, sized 6 x 22mm 21° x 34° Oblong beam shape WFL Wide flood Many facets, sized 6 x 12mm 30° x 51° Oblong beam shape Accessories ETC Part # Colour frame 19 cm sq.
English Installing a lens Never operate the Source Four MultiPAR CE without a lens in place. Change lenses if they become cracked or badly scratched 1. Position the fixture with the front of the unit (the lens side) facing you, and tilted up slightly (Figure 3). 2. Hold the lens by the edge, and position it so the convex side faces the back of the fixture (Figure 4). Installing the lens with the convex side out will not impair the optics, but it will make removing the lens more difficult. 3.
English Cleaning the reflector Do not use glass or window cleaners on the reflector. Chemicals in the cleaners will harm the reflective coating. Do not use paper towels or harsh materials to wipe the reflector. These materials can scratch the surface of the reflector. 1. Unplug the fixture before attempting to clean the reflector. 2. Remove the lamp before attempting to clean the reflector. 3. Remove the lens so you can access the reflector from the front of the fixture. See Removing a lens on page 6. 4.
English Spare parts list 2 3 1 Source Four MultiPAR CE Final Assembly Reference Number Part Number Description Quantity Required 1 7061A3051 Hanger Bracket, MultiPar 2 2 HW587 1/2” washer 4 3 HW5138 1/2 -13 x 1” HH bolt 2 not pictured 7061A1030 Source 4 Par safety screen varies not pictured 7061A3050 Trunnion Bracket, MultiPar 2 Source Four MultiPAR CE 9
English Spare parts list Lamp Burner Assembly Reference Number Part Number Description Quantity Required 1 W330-01 TP22 CLCLM assembly, 1, 5 mm Wire, Silver contact 2 2 W330-02 TP22 CLCM assembly, ceramic 1 3 W330-03 TP22 CLCM assembly, mica 1 1-6 7061A2027 Lamp Burner Assembly 90 cm 1 1-6 7061A2028 Lamp Burner Assembly 150 cm 1 1-6 7061A2029 Lamp Burner Assembly 210 cm 1 6 7061A3061 Thumbscrew 1 7 various HPL lamp 1 10 Source Four MultiPAR CE
English Circuit wiring configurations for the MultiPar-12. The Source 4 MultiPAR CE can be wired for 3 circuit or 4 circuit configurations. Before changing the configuration, make sure that you have sufficient power (dimmer capacity) to operate the fixture. There are four terminal blocks inside the unit to place wiring. Each terminal block has four lead connection points. All of the hot and neutrals are labeled with a number for your convenience. Three circuit configuration 1.
Americas 3030 Laura Lane, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel: +608 831 4116+800 688 4116 Fax: +608 836 1736 +800 555 8912 Email: (US) mail@etcconnect.com Europe Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel: +44 (0)20 8896 1000 Fax: +44 (0)20 8896 2000 (UK) mail@etceurope.
