Designer v1.11.0 Instruction Manual

Network - Controller configuration

With a Controller selected, choose the Controller Config tab:

Uniquely, these settings are stored on the Controllers themselves, not in the project or as part of the upload. They

can be changed here or by using the web interface. The Controller does not have to be associated with a project

Controller to do so.

Network

Use these fields to set a static IP address for the Controller, by default the Controller is set to receive an IP

address from a DHCP server.

If the IP settings have been stored on the Controller's memory card as a "TPC.cfg" or "MSC.cfg" file then these

fields will be greyed out.

Logging

Select the verbosity (detail) of the log that can be viewed either via the web interface or from within Designer

using View > Controller Log and selecting a Controller (which can be connected via Ethernet or USB):

- 145 -