Instructions / Assembly

Application Information

Etched FX premium glass etch vinyl can be easily applied to any smooth glass surface.

This translucent films have a stylish and unique pattern to give you privacy with style, while

allowing natural light to enter the room.

PROVIDES PRIVACY

HIDES UNWANTED VIEWS

ACCENTS THE ROOM

APPLIES EASILY

TRIM TO FIT OR ADD PANELS

1. Measure area of application to ensure proper fit. Some areas may require the purchase

of several kits. If necessary, trim the etched film for a custom fit.

2. Thoroughly clean application area using alcohol or any Ammonia based window cleaner.

Must be free of dirt and grease.

3. Tape your graphic into desired position, the graphic must be flat. Firmly tape center

of graphic.

4. 4.

Un-tape one side of graphic and fold back over top of side taped to glass. Reveal corners

and tape them down.

5. Carefully remove paper backing; Cut backing off at center.

6. Fold graphic back into position, pulling taut.

7. Squeegee starting from center rubbing in an up and down motion.

8. Remove remaining tape and repeat steps 4 thru 7.

8. Carefully remove clear application tape at 180 degree angle. If graphic is lifting, lay

application tape back down and re-rub.application tape back down and re-rub.

10. Cut door seams 1/8 inch back using razor blade if desired.

11. Any remaining air bubbles smaller than 1/8 inch will dissipate within one week.

PAGE 1
Ap p l i c a t i o nI n f o r ma t i o n Et c he dFXpr e mi um gl a s se t c hv i ny l c a nbee a s i l ya ppl i e dt oa nys moot hgl a s ss ur f a c e . Thi st r a ns l uc e ntf i l msha v eas t y l i s ha nduni quepa t t e r nt ogi v ey oupr i v a c ywi t hs t y l e , whi l e a l l owi ngna t ur a l l i ghtt oe nt e rt her oom. . PROVI DESPRI VACY . HI DESUNWANTEDVI EWS . ACCENTSTHEROOM . APPLI ESEASI L Y . TRI M TO FI TORADDPANELS 1 . Me a s ur ea r e aofa ppl i c a t i ont oe ns ur epr ope rf i t .