DVD2658 DVD PLAYER INSTRUCTION MANUAL 1-11
IMPORTANT NOTICE QUICK GUIDE FOR HDMI FUNCTION 1. Please check to see if your TV set has a HDMI video input. 2. If your TV set has a HDMI video input then connect the DVD player to the TV set using an HDMI cable (not included). Switch on the DVD player and TV set. The DVD Player output will automatically be adjusted from the default video output of 480p/576p to a higher-resolution setting to match that of your TV screen, 720P, 1080i, or 1080p. The TV screen will now show the "eTEC" logo.
TABLE OF CONTENTS IMPORTANT NOTICE Front and Back Panels. ............................................................................1 Front Panel.............................................................................................1 Back Panel..............................................................................................1 Remote Control... .................................................................................. 2 Operating the Remote Control...............................
FRONT AND BACK PANELS Front Panel Functions DVD2658 POWER 2 1. POWER 2. LED DISPLAY 3. PREV 5 4. OPEN/CLOSE 5. PLAY/PAUSE 6. NEXT Back Panel Functions MODEL: DVD2658 AC 120V ~60Hz 20W INTERTEK CONFORMS TO ANSI/UL STD 60065 CM CAUTION CERTIFIED TO C LISTED RISK OF ELECTRIC SHOCK DO NOT OPEN CAN/CSA STD US C22.2 No. 60065 4 5 6 1. Y, Pb/Cb, and Pr/Cr output. 2. HDMI Connector. 3. VIDEO output. 4. AUDIO output. Use to connect both right and left channels. 5. COAXIAL output. 6.
REMOTE CONTROL POWER [1] ANGLE [2] SUBTITLE [3] TITLE [4] PBC(Playback Control) [5] POWER SUBTITLE PBC [20] OPEN/CLOSE OPEN/CLOSE ANGLE LANGUAGE DISPLAY TITLE RESUME VOL- MUTE [21] [22] [23] [24] LANGUAGE DISPLAY RESUME MUTE VOL+ VOL-(Volume Down) [6] [25] VOL+(Volume Up) ENTER [7] ENTER MENU SETUP [26] SETUP MENU [8] PLAY/PAUSE [9] STOP PLAY/PAUSE STEP STOP [10] FWD(Forward) [11] REV(Reverse) [12] [27] STEP REV 5 FWD PREV NEXT 2 3 4 6 7 8 [28] PREV(Previous) [29] NEXT
OPERATING THE REMOTE CONTROL Battery Installation 1. Push down and out on the battery compartment cover to remove it. 2. Insert the two "AAA" batteries into the battery compartment of the remote control, making sure the + and - signs on the batteries and the inside of the battery compartment match up. 3. Replace the battery compartment cover. Notes: Do not mix batteries from different manufacturers or old with new.
FUNCTIONS To play a DVD video disc: Turn on the TV set and select the A / V mode. 1. Press the POWER button on front panel of the DVD player, DISC LOADING appears on screen. If there is no disc in the player, NO DISC will show on the screen 2. Press the OPEN / CLOSE button. The disc tray will open. Once the player has read the disc, the unit automatically will begin playback. Note: It is possible to damage a disc if it is not placed correctly on the guides in the disc tray.
FUNCTIONS Fast Forward Or Fast Reverse Screen Display REV While a disc is playing, the status of various functions may be checked, such as the title, track number, and several time categories. 1. Press the DISPLAY button once and the title appears along with the chapter and how much time has elapsed. DISPLAY To activate either function, simply press and hold the FWD or REV buttons on the remote 2. Press the DISPLAY button again and the control.
FUNCTIONS Audio-L & Audio-R The default audio setup is STEREO. Press Audio-L, and the sound will be output from Left channel only, Press Audio-R, and the sound will be output from Right channel only. Press Audio-L or Audio-R again and the sound will return to Stereo. Language The unit has the capability to show movies in English, French and Spanish. 1. Press the LANGUAGE button. The language menu will appear. Select the desired language by pressing the LANGUAGE button.
FUNCTIONS PBC function(VCD Only) With the PBC function on, choosing a song on a VCD can only be done from the main menu. With the PBC function off, song selections can be made by entering the number of the song selection with the number buttons. PBC Repeat Play This DVD receiver allows repeated playback of specific titles, chapter/tracks, or segments. It even allows switching between two items that are being repeated, 1. Select the item to repeat. 2. Press the REPEAT button.
SYSTEM SETUP General Setup This option is used to setup the following format and functions: TV screen format, video functions, DVD settings, language, parental controls, and others.
SYSTEM SETUP VIDEO OUTPUT Use remote control to select the output you desire from the 4 kinds available. The player automatically defaults to HDMI and Component video simultaneously Audio Setup Includes the setup of STEREO & 5.1 Channel speakers.
MP3 FUNCTION OPERATION OF MP3 FUNCTION MP3 is an audio compression mode using Level 3 of the international standard MPEG. The audio signal is compressed in a rate of 12: 1. A MP3 disc can contain over 600 minutes of music that rivals Compact Discs in sound quality. Files Menu of Mp3 play When playing a MP3 disc, 2 file menus can be selected by pressing the PROG button: 1) Folder List and 2) File List. 1.
TROUBLESHOOTING This handy trouble-shooting guide is provided to save you time if you experience any problems with this DVD player. If the problem is not listed or if the provided solution does not correct the problem, contact our customer support department. Possible Problems / Solutions 1) No power A. Check to ensure that the power plug is securely connected to the power outlet and that the outlet is in working condition (test outlet by CAREFULLY plugging another electrical item in to it). B.
LIMITED 90 DAY WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a 90-day period after purchase. We will repair or replace the unit free of charge should it become defective under this warranty, providing you submit proof of purchase (sales slip) along with the unit and all accessories. During the initial 90 day period after original purchase, we will service or exchange, at no charge.
