User's Manual

1234
1. ON/OFF
2. Mode:Switch AUX,USB,Bluetooth
3. Previous song/Voice down
4. Play/Pause
5. Next song/Voice up
6. Input AUX
7. USB: U Disk
8. Micro input
1. Connect to Micro input port
2. Long press the [POWER] button on the speaker or Short press the remote control
switch to turn on the speaker.
3. LED indicator lights flash blue and a "The bluetooth ready to pair"sound is heard,
then go into bluetooth pairing mode.
3.1 During the pairing process, keep the speaker and bluetooth device within 10
meters of each other.
3.2 Set your phone or other bluetooth device to bluetooth status.
BLUETOOTH CONNECTION METHOD FOR ANDROID SYSTEM:
1. Go to SETTINGS> BLUETOOTH(make sure bluetooth is turned ON)
2. When your bluetooth enabled device find the speaker, select “Monster Bluetooth
Soundbar” from the list of found devices. When succeeding pairing, you will hear
“The bluetooth device is connected successfully”. Blue LED indicator light bright on.
When play the music, the blue led indicator flashes
• Bluetooth：5.0
• Speaker: 5 W*2
• Function: BT AUX USB
• Dimensions: 810*80*74 mm
Bluetooth TV Soundbar
SOUNDBAR
LOCATION OF CONTROLS
IN THE BOX LOCATION OF CONTROLS OPERATION PROCESS
MOUNTING THE SPEAKER
SPECIFICATION
1. ON/OFF
2. Switch AUX,USB,Bluetooth
3. Mute
4. Previous song
5. Play/Pause
6. Next song
7. Voice down
8. Reset settings
9. Voice up
1
4
7
REMOTE
CONTROL
1.2M
AUX CABLE
1.2M
USB to
Micro cable
2
SCREWS
USER
MANUAL
1. Measure a width of 26.77 inches on the wall.
2. Mark the position of the mounting screws
on the wall using a pencil.
3. Drill the supplied screws directly into the
marks that you have made on the wall and
leave approximately 0.3 inch length to hook
the Wireless Sound Bar.
4. Put the Wireless Sound Bar onto the
mounting screws. Make sure they are firm and
stable.
26.77 INCHES
&#5#
REMOTE CONTROL
SOUNDBAR
WITH LED LIGHTS
2MBSK1018B0G7
REMOTE CONTROL
2
3
6
9
5
8
1
2
3
4
5
6
7
8